Restriction of Hazardous Substances in Electrical and Electronic Equipment RoHS
Contents |
[edit] Background
The amount of waste electrical and electronic equipment (WEEE) generated every year in the EU and UK is increasing rapidly. It is now one of the fastest growing waste streams. Electrical and electronic equipment (EEE) can contain hazardous substances. Since 2003, EU laws have restricted the use of these hazardous substances.
In Great Britain and in Northern Ireland many types of electrical and electronic equipment (EEE) are regulated to control the levels of certain hazardous substances and chemicals they contain, with the aim of protecting human and animal health. This extends to specific steps that must be taken where a product is known or suspected to be non-compliant.
- have supporting technical documentation (often referred to as a technical file) to demonstrate compliance
- have a Declaration of Conformity
- be labelled with the required information
- display the appropriate conformity marking for the GB and/ or NI markets as appropriate
In Great Britain and Northern Ireland, the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (as amended) are the underpinning legislation. However, there are differences in how they apply in Great Britain and Northern Ireland.
[edit] Increasing issues
The rise in the production and use of electrical and electronic products, such as mobile phones, computers and kitchen appliances, has resulted in an increasing volume of electrical and electronic waste. During the use, collection, treatment and disposal of such waste, products may release harmful (hazardous) substances such as lead, mercury and cadmium, which can cause major environmental and health problems.
To address such challenges, EU laws restrict the use of certain hazardous substances in electrical and electronic equipment through the RoHS Directive. In parallel, the WEEE Directive promotes the collection and recycling of such equipment.
[edit] Restricted substances
The RoHS Directive currently restricts the use of ten substances: lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE), bis(2-ethylhexyl) phthalate (DEHP), butyl benzyl phthalate (BBP), dibutyl phthalate (DBP) and diisobutyl phthalate (DIBP).
All products with an electrical and electronic component, unless specifically excluded, have to comply with these restrictions. In 2017, the Commission adopted a legislative proposal adjusting the scope of the RoHS Directive.
Manufacturers placing EEE on the market in Great Britain and/or Northern Ireland must evaluate their production controls to ensure that their products do not exceed the maximum prescribed levels of the following hazardous substances:
- Cadmium a heavy metal with many uses, including rechargeable batteries, it is also present in cigarette smoke. Exposure to cadmium can affect the kidneys, lungs and bones. Less than 0.01%.
- Lead naturally occurring toxic metal used in alloys, ceramic components, and solders, causes animal and human poisoning can interfere with numerous human enzymes, and cause brain damage. Less than 0.1%.
- Mercury naturally occurring element in air, water and soil. Poisoning can cause eyes, skin, stomach, chest and breathing issues, insomnia, weakness, exhaustion, weight loss. Serious in issue children. Less than 0.1%..
- Hexavalent chromium form of metallic naturally occurring element chromium, in rocks, animals, plants, soil. Considered carcinogenic, lung, nasal, and sinus cancer increases inhalation exposure. Less than 0.1%.
- Polybrominated biphenyls (PBB) man-made chemicals used as fire retardants in plastics and variety of Products. Linked to tumors, thyroid hormone imbalance, neurodevelopmental toxicity in children. Less than 0.1%.
- Polybrominated diphenyl ethers (PBDE) man-made organobromine compounds used as flame retardants. Effects children, impair cognitive development, motor skills, increased impulsivity, and decreased attention. Less than 0.1%.
- Bis (2-ethylhexyl) phthalate belongs to family of chemicals called phthalates, added to some plastics for flexibility, causes cancer and birth defects as well as other reproductive harm. Less than 0.1%.
- Benzyl butyl phthalate organic compound historically used as plasticiser, causes irritation, eyes, nose throat, nausea, vomiting, dizziness, headache. Long-term exposure may cause liver and kidney damage. Less than 0.1%.
- Dibutyl phthalate, a organic man-made compound added to plastics as plasticiser. Acute (short-term) and chronic (long-term) toxicity. No information is available regarding the effects animals and possibly humans. Less than 0.1%.
- Diisobutyl phthalate, a man-made phthalate or chemical plasticiser. Exposure can induce changes in body weight, liver weight, reproductive effects, testicular weight, spermatogenesis, testosterone levels and foetal body weight. Less than 0.1%.
[edit] Compliance
To demonstrate compliance, technical documentation is required, comprising:
- a Declaration of Conformity
- a record of the related conformity assessment procedure
- any other production control documentation, such as test reports
This is often called the Technical Package. It must be retained for 10 years after the last product is first placed on the market and be made available to OPSS on request.
This article is based on information published by the EU and by the UK government, as of June 2023, for further information and updates visit external links below.
[edit] Related articles on Designing Buildings
- Electrical and electronic equipment
- End of life potential.
- Environmental impact assessment EIA.
- Environmental plan for building design and construction.
- Glossary of electrical terms.
- Hire, reclaim and reuse scheme combats construction waste.
- How to conduct a pre-demolition audit.
- Plastic and recycling.
- Recycling explained.
- Types of plastic in construction.
- Waste and Resources Action Programme WRAP.
- Waste hierarchy.
- Waste management plan for England..
[edit] External links
https://environment.ec.europa.eu/topics/waste-and-recycling/rohs-directive_en
Featured articles and news
Twas the site before Christmas...
A rhyme for the industry and a thankyou to our supporters.
Plumbing and heating systems in schools
New apprentice pay rates coming into effect in the new year
Addressing the impact of recent national minimum wage changes.
EBSSA support for the new industry competence structure
The Engineering and Building Services Skills Authority, in working group 2.
Notes from BSRIA Sustainable Futures briefing
From carbon down to the all important customer: Redefining Retrofit for Net Zero Living.
Principal Designer: A New Opportunity for Architects
ACA launches a Principal Designer Register for architects.
A new government plan for housing and nature recovery
Exploring a new housing and infrastructure nature recovery framework.
Leveraging technology to enhance prospects for students
A case study on the significance of the Autodesk Revit certification.
Fundamental Review of Building Regulations Guidance
Announced during commons debate on the Grenfell Inquiry Phase 2 report.
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.
CIOB photographic competition final images revealed
Art of Building produces stunning images for another year.
HSE prosecutes company for putting workers at risk
Roofing company fined and its director sentenced.
Strategic restructure to transform industry competence
EBSSA becomes part of a new industry competence structure.
Major overhaul of planning committees proposed by government
Planning decisions set to be fast-tracked to tackle the housing crisis.
Industry Competence Steering Group restructure
ICSG transitions to the Industry Competence Committee (ICC) under the Building Safety Regulator (BSR).
Principal Contractor Competency Certification Scheme
CIOB PCCCS competence framework for Principal Contractors.
The CIAT Principal Designer register
Issues explained via a series of FAQs.