Waste electrical and electronic equipment WEEE
The European Environment Agency defines Waste electrical and electronic equipment or WEEE as
"electrical or electronic equipment (EEE) which is waste within the meaning of Article 1(a) of Directive 75/442/EEC, including all components, sub-assemblies and consumables, which are part of the product at the time of discarding . Council Directive 75/442/EEC of 15 July 1975 on waste: 'waste' means any substance or object which the holder disposes of or is required to dispose of pursuant to the provisions of national law in force."
This type of material will usually fall under the WEEE Directive. The WEEE Directive aims to contribute to sustainable production and consumption by;
- preventing the creation of WEEE as a first priority
- contributing to the efficient use of resources and the retrieval of secondary raw materials through re-use, recycling and other forms of recovery
- improving the environmental performance of everyone involved in the life cycle of EEE
In order to achieve these objectives, the Directive
- requires the separate collection and proper treatment of WEEE and sets targets for their collection as well as for their recovery and recycling
- helps European countries fight illegal waste exports more effectively by making it harder for exporters to disguise illegal shipments of WEEE
- reduces the administrative burden by calling for the harmonisation of national EEE registers and of the reporting format
The Waste Electric and Electronic Equipment (WEEE) Regulations 2013 became law in the UK on the 1st of January 2014 and replaced the 2006 Regulations. Those Regulations transposed the main provisions of Directive 2012/19/EU on WEEE which recast the previous Directive 2002/96/EC. The scope of the Regulations were extended in January 2019 to cover further categories of electric and electronic equipment (EEE).
[edit] Related articles on Designing Buildings
- Articles about electricity.
- Consumer electronics.
- Consumer unit.
- ECA articles.
- Electrical appliance.
- Electrical equipment.
- Electrical installation.
- Electrical safety.
- Electrical system.
- Electrical and electronic equipment
- End of life potential.
- Environmental impact assessment EIA.
- Environmental plan for building design and construction.
- Planned obsolescence.
- Plastic and recycling.
- Recycling explained.
- Types of plastic in construction.
- Waste and Resources Action Programme WRAP.
- Waste hierarchy.
- Waste management plan for England.
Featured articles and news
The current and future global market dynamics of boilers
Significant challenges but adaptation to sustain for longer.
Designing sustainability and performance into buildings
Specifying and selecting sustainable resilient timber products.
Modifying wood to improve resistance to decay and movement.
A last minute, long look for built environment professionals.
The architecture of creative reuse. Book review.
Installing solar panels on listed structures.
Sustainable development global goals, history in progress?
"Unless we act now, the 2030 Agenda will become an epitaph for a world that might have been."
Mike Kagioglou FCIOB named CIOB President
'Sustainable Development Goals must be focus for construction'
BSRIA training; a look at what's on offer
From energy management to compliance training.
TESP video warns to beware of rogue trainers.
Highlighting the slippery tactics of non-approved providers.
New Building Safety Wiki launched
Boosting awareness and understanding of the new fire safety regime.
New playbook on AI in construction published by CIOB
How to get to grips with, and the best from AI.
Digital Construction Report NBS
BIM, cloud, off-site, immersive tech, AI, twins and sustainability.