Coping and capping
Cappings and copings are used to cap the tops of masonry parapets and freestanding walls to prevent rainwater from penetrating into the construction below. They can be made from profiled metal such as lead, aluminium, zinc, copper and plastic-coated steel, or by using special bricks or masonry.
Irrespective of the materials from which they are made, a coping will typically project by around 50mm on either side of the wall, whereas a capping will sit flush to the wall with no projections.
Copings have projections to throw water as far as possible from the wall surface below. This is facilitated by the inclusion of drips – typically 10mm-wide semi-circular grooves cut into the underside of the projections – designed to prevent rain from dripping back against the wall.
Because of their position, cappings and copings are exposed to temperature extremes and frequent wetting/drying cycles. As they are more exposed than ordinary walling, they should be made of materials that have greater resistance to frost and sulphate action. To assist with water run-off, the tops of copings and cappings typically feature either a single or double slope.
In most cases, the coping/capping arrangement will not be completely water tight. Therefore, to avoid water penetration into the wall below, a damp-proof course is usually installed beneath the coping/capping.
NB Short Guide: Climate Change Adaptation for Traditional Buildings, published on 10 July 2017 by Historic Scotland, defines a cope as a: ‘Masonry or concrete slab projecting over a masonry element, designed to shed water.’
[edit] Alternative meaning
AR5 Climate Change 2014: Impacts, Adaptation, and Vulnerability, Glossary, published by the Intergovernmental Panel on Climate Change (IPCC) defines coping as: ‘The use of available skills, resources, and opportunities to address, manage, and overcome adverse conditions, with the aim of achieving basic functioning of people, institutions, organizations, and systems in the short to medium term.’
It defines coping capacity as: ‘The ability of people, institutions, organizations, and systems, using available skills, values, beliefs, resources, and opportunities, to address, manage, and overcome adverse conditions in the short to medium term.’
[edit] Related articles on Designing Buildings
Featured articles and news
Construction industry reactions to the election result
ECA, CIAT and more to come as published.
At a Crossroads; Pathways to a Net Zero Future
Background to and summary of this key Renewable UK report.
Installing solar panels on listed structures.
The current and future global market dynamics of boilers
Significant challenges but adaptation to sustain for longer.
Designing sustainability and performance into buildings
Specifying and selecting sustainable resilient timber products.
Modifying wood to improve resistance to decay and movement.
A last minute, long look for built environment professionals.
The architecture of creative reuse. Book review.
Sustainable development global goals, history in progress?
"Unless we act now, the 2030 Agenda will become an epitaph for a world that might have been."
Mike Kagioglou FCIOB named CIOB President
'Sustainable Development Goals must be focus for construction'
BSRIA training; a look at what's on offer
From energy management to compliance training.
TESP video warns to beware of rogue trainers.
Highlighting the slippery tactics of non-approved providers.
New Building Safety Wiki launched
Boosting awareness and understanding of the new fire safety regime.
New playbook on AI in construction published by CIOB
How to get to grips with, and the best from AI.
Digital Construction Report NBS
BIM, cloud, off-site, immersive tech, AI, twins and sustainability.