Working in confined conditions
Contents |
[edit] Introduction
A confined space is a space that is substantially enclosed, may have limited or restricted means of entry or exit, and poses a health hazard both from its spatially restricted nature and the access to and from it, or from the materials and objects that may be encountered. It hinders and potentially makes unsafe the activities of those inside. Confined spaces are not usually intended for continuous occupation.
Ship building, water, construction and mining industries may required work in confined spaces.
[edit] Types of confined space
Spaces that may be considered confined spaces include:
- Low headroom basements.
- Crawl spaces.
- Catwalks, gantries and arbour pits.
- Lift and escalator pits.
- Attics and lofts.
- Tanks.
- Manholes.
- Storage bins.
- Pipelines.
- Vaults.
- Open ditches.
Hazards that may be encountered in confined spaces can include:
- Poor air quality or insufficient oxygen for an entrant to breathe, or inhalation of stale or polluted air.
- Materials that could engulf a worker e.g a liquid or flowable solid substance.
- Total darkness.
- Atmospheric hazards, e.g flammable gas, airborne combustible/non-combustible gas.
- Entrapment hazards.
- Low bulkheads or very low ceiling heights that could cause head injuries.
- Sloping floors that could cause a slip.
- Walls that converge inward to a smaller cross-section.
- Very hot, unguarded heating or water pipes.
- Exposed live wires.
- Unguarded machinery.
- Chemical exposure.
- Rodents.
[edit] Confinement
If a confined space is so configured that it presents an entrapment hazard to entrants, they should be made aware of the fact prior to entering and should be required to have a permit to enter. They should also receive training to ensure they are aware of, and can deal with, the potential dangers. Pre-existing health problems should be identified or disclosed beforehand e.g workers who suffer from claustrophobia should not be allowed access to crawl spaces.
[edit] Legislation
The Health and Safety at Work etc Act 1974 renders employers responsible for ensuring the safety of their employees and others. This is reinforced by:
- The Confined Spaces Regulations 1997 which apply where the assessment identifies risks of serious injury from work in confined spaces. Critically, it mandates that entry to confined spaces should be avoided if the work can be undertaken another way, e.g by doing the work from the outside. But if unavoidable, a safe system of working should be chosen and adequate emergency measures should be in place before the work begins.
- The Management of Health and Safety at Work Regulations 1999. Under the MHSW Regulations, employers and self-employed people should carry out suitable and sufficient assessment of the risks for all work activities for the purpose of deciding what measures are necessary for safety. For confined spaces, this means identifying the hazards present, assessing the risks and determining what precautions to take.
[edit] Training
Training will be required if workers are likely to have to work in confined spaces. The overall training objective is to protect those entering or working in or around a confined space. Such courses should teach the physical, chemical, and biological principles related to safe working within confined spaces. Potential entrants should be taught exactly what constitutes a confined space and the potential hazards they may encounter.
[edit] Related articles on Designing Buildings Wiki
- Arbour.
- Asbestos.
- CDM.
- CDM Regulations.
- COSHH.
- Deleterious materials.
- Fire and rescue service.
- Gas Safe.
- Health and safety.
- Health and safety file.
- Health and safety inspector.
- Notify HSE.
- Occupational health.
- Reporting accidents and injuries on construction sites.
- Risk assessment under The Regulatory Reform (Fire Safety) Order 2005.
- Safety.
[edit] External resources
Featured articles and news
Plumbing and heating systems in schools
New apprentice pay rates coming into effect in the new year
Addressing the impact of recent national minimum wage changes.
EBSSA support for the new industry competence structure
The Engineering and Building Services Skills Authority, in working group 2.
Notes from BSRIA Sustainable Futures briefing
From carbon down to the all important customer: Redefining Retrofit for Net Zero Living.
Principal Designer: A New Opportunity for Architects
ACA launches a Principal Designer Register for architects.
A new government plan for housing and nature recovery
Exploring a new housing and infrastructure nature recovery framework.
Leveraging technology to enhance prospects for students
A case study on the significance of the Autodesk Revit certification.
Fundamental Review of Building Regulations Guidance
Announced during commons debate on the Grenfell Inquiry Phase 2 report.
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.
CIOB photographic competition final images revealed
Art of Building produces stunning images for another year.
HSE prosecutes company for putting workers at risk
Roofing company fined and its director sentenced.
Strategic restructure to transform industry competence
EBSSA becomes part of a new industry competence structure.
Major overhaul of planning committees proposed by government
Planning decisions set to be fast-tracked to tackle the housing crisis.
Industry Competence Steering Group restructure
ICSG transitions to the Industry Competence Committee (ICC) under the Building Safety Regulator (BSR).
Principal Contractor Competency Certification Scheme
CIOB PCCCS competence framework for Principal Contractors.
The CIAT Principal Designer register
Issues explained via a series of FAQs.