Headroom in buildings and other structures
Contents |
[edit] Introduction
In a building, headroom is the clear, vertical height (vertical clearance) which exists from the top surface of a floor to the underside of a:
Between two floors, the headroom is the clear vertical space between the two decks, from the top of the finished floor level of the lower deck, to the underside of the soffit of the upper deck. Low headroom may increase the likelihood of injury or the difficulty of manoeuvring large objects.
The headroom may or may not be sufficient to allow people to pass under easily. If not sufficient, it will not be possible to pass through without crouching or striking the top surface.
[edit] Stairs
On a flight of stairs, the headroom is the vertical distance between the pitch line (or nosing line) and the ceiling, taking into account any bulkheads. Approved Document K of the Building Regulations (section 1.11, diagram 1.3) stipulates a minimum headroom of 2m for all building types – whether on the stairs or on a landing.
[edit] Tunnels and bridges
Headroom may also refer to the clear, vertical height from a road’s top surface to the underside of a bridge or to the crown of a tunnel (or the ceiling of some buildings such as car parks). A sign indicating ‘low headroom’ warns that some vehicles may not be able to pass through without hitting the underside of the structure. In these cases, the clear height of the available headroom will be displayed, and there may be additional warning signs in advance of the low headroom or barriers to try to prevent impact.
[edit] Culverts and outflows
Culvert, screen and outfall manual, (CIRIA C786) published by CIRIA in 2019, defines headroom as the: ‘Vertical gap between the water surface and the roof (soffit) of a culvert or outfall to allow for floating debris (also known as air draught).’
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Twas the site before Christmas...
A rhyme for the industry and a thankyou to our supporters.
Plumbing and heating systems in schools
New apprentice pay rates coming into effect in the new year
Addressing the impact of recent national minimum wage changes.
EBSSA support for the new industry competence structure
The Engineering and Building Services Skills Authority, in working group 2.
Notes from BSRIA Sustainable Futures briefing
From carbon down to the all important customer: Redefining Retrofit for Net Zero Living.
Principal Designer: A New Opportunity for Architects
ACA launches a Principal Designer Register for architects.
A new government plan for housing and nature recovery
Exploring a new housing and infrastructure nature recovery framework.
Leveraging technology to enhance prospects for students
A case study on the significance of the Autodesk Revit certification.
Fundamental Review of Building Regulations Guidance
Announced during commons debate on the Grenfell Inquiry Phase 2 report.
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.
CIOB photographic competition final images revealed
Art of Building produces stunning images for another year.
HSE prosecutes company for putting workers at risk
Roofing company fined and its director sentenced.
Strategic restructure to transform industry competence
EBSSA becomes part of a new industry competence structure.
Major overhaul of planning committees proposed by government
Planning decisions set to be fast-tracked to tackle the housing crisis.
Industry Competence Steering Group restructure
ICSG transitions to the Industry Competence Committee (ICC) under the Building Safety Regulator (BSR).
Principal Contractor Competency Certification Scheme
CIOB PCCCS competence framework for Principal Contractors.
The CIAT Principal Designer register
Issues explained via a series of FAQs.