Densification
More than half the planet's population lives in cities, and this figure is predicted to rise to more than 70% by the second half of the century. During the same period, human population will have increased by two billion.
As people have tended to move from rural to urban areas, and the boundaries of those urban areas have been constrained by policies such as the protection of the green belt, so those areas have become more densely occupied, with buildings expanding upwards and downwards, green areas and brownfield sites being developed and homes becoming more compact and closer together.
British architect Richard Rogers, pointed out that in England, in 1800, just 10% of the population lived in towns and cities, now the figure is 90%, and the population is projected to continue to increase. He suggested it is short sighted to imagine we can sustain anything other than compact lifestyles. See Compact sustainable city for more information.
Densification is a term used by planners, designers, developers and theorists to describe the increasing density of people living in urban areas.
There are number of methods by which urban density can be measured, including:
- Floor area ratio: Total building floor area divided by the area of the land buildings are built on.
- Residential density: Number of dwelling units in a given area.
- Population density: Number of people in a given area.
- Employment density: Number of jobs in a given area.
Advocates of densification argue that the denser a city, the more sustainable it is, since dense cities use less energy per person than suburban or rural areas where people are spread over a wider distance and so travel more often and further. It is also argued that less waste is produced by dense cities as smaller spaces take less energy to heat and cool and use fewer resources to fit out. In addition, the level of infrastructure and supply chain coordination can be more efficient in areas of high density.
Policies that encourage densification generally also provide for the protection of communities and green and public spaces. Home to over 13 million people, Tokyo is often used as an example of positive densification with a small proportion of high rise construction; an answer to critics who believe that densification necessarily leads to an increase in the number of tower blocks. Advocates suggest the aim should be better organisation and finding ways to increase shared space.
High-density living can be extremely desirable, as the New Town in Edinburgh and Kensington in London demonstrate. Both have at least 250 dwellings per hectare, and yet are extremely expensive and highly sought after. In our most attractive villages and market towns it is the older houses clustered at higher densities in the centre that achieve the highest prices. Building at 50 homes to the hectare and above has created the attractive spaces we like best. At below 50 homes per hectare, it is hard to keep shops, buses, doctors, nurseries and schools within walking distance. The less dense our cities are, the further they sprawl, the worse the traffic problems are.
Traditional southern European towns and villages can have double, triple or even quadruple the density of a typical English town. Continental cities are also built at a much higher density.
Despite this, in 2010, the government’s Planning Policy Statement 3 (PPS3) was revised to remove the national indicative minimum density of 30 dwellings per hectare to give local authorities the '…flexibility to set density ranges that suit the local needs' a position that was re-stated in the National Planning Policy Framework (NPPF) in 2012.
Critics suggest that densification means reducing the private space of inhabitants and point to the fact that, whilst around 50% of the global population lives in cities, they account for more than 75% of the consumption of non-renewable resources, and create around three quarters of global pollution. They also point to the fact that since 1900 our cities have actually become less dense and more extensive.
The successful development of urban areas requires consideration of more than just density and planning policy, rather it needs integrated consideration of; governance and growth, urban development and infrastructure, environment and natural resources, and society and community. See Smart cities for more information.
A Savills Research Report to the Cabinet Office, Completing London’s Streets, How the regeneration and intensification of housing estates could increase London’s supply of homes and benefit residents, published on 7 January 2016, compared two methods of redeveloping social housing estates in London; replacing the existing site with new blocks and towers in a similar layout but higher density (contemporary regeneration) or reintegrating the estates into the surrounding urban fabric (complete streets). They found that the complete streets approach creates greater opportunities for mixed use development and integration into the wider city, resulting in better life chances. Publication of the report coincided with a pledge by David Cameron to tackle social deprivation and poverty by transforming ‘sink estates’ around the country. See Sink estate regeneration plans.
In September 2016, Centre for London published a report suggesting that densification of large estates across in London could allow the construction of between 80,000 and 160,000 homes in the next 20 years.
NB: Densification can also refer to the process of soil compaction.
[edit] Related articles on Designing Buildings
- Agglomeration.
- Area for intensification.
- Could microhousing tackle London's housing crisis?
- Gentrification.
- Megacity.
- Micro flats.
- Must cities grow to compete?
- Redefining density, making the best use of London’s land to build more and better homes.
- Shanghai's One City Nine Towns.
- Smart cities.
- Suburb.
- The compact sustainable city.
- The future of the green belt.
- Tokyo.
- Urbanisation.
- Urban creep.
- Urban sprawl.
Featured articles and news
New apprentice pay rates coming into effect in the new year
Addressing the impact of recent national minimum wage changes.
EBSSA support for the new industry competence structure
The Engineering and Building Services Skills Authority, in working group 2.
Notes from BSRIA Sustainable Futures briefing
From carbon down to the all important customer: Redefining Retrofit for Net Zero Living.
Principal Designer: A New Opportunity for Architects
ACA has launches a Principal Designer Register for architects.
A new government plan for housing and nature recovery
Exploring a new housing and infrastructure nature recovery framework.
Leveraging technology to enhance prospects for students
A case study on the significance of the Autodesk Revit certification.
Fundamental Review of Building Regulations Guidance
Announced during commons debate on the Grenfell Inquiry Phase 2 report.
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.
CIOB photographic competition final images revealed
Art of Building produces stunning images for another year.
HSE prosecutes company for putting workers at risk
Roofing company fined and its director sentenced.
Strategic restructure to transform industry competence
EBSSA becomes part of a new industry competence structure.
Major overhaul of planning committees proposed by government
Planning decisions set to be fast-tracked to tackle the housing crisis.
Industry Competence Steering Group restructure
ICSG transitions to the Industry Competence Committee (ICC) under the Building Safety Regulator (BSR).
Principal Contractor Competency Certification Scheme
CIOB PCCCS competence framework for Principal Contractors.
The CIAT Principal Designer register
Issues explained via a series of FAQs.
Comments