Reasons for using MVHR systems
Contents |
[edit] MVHR in brief
Valued at $106.69 million in 2022, the Mechanical Ventilation Heat Recovery (MVHR) UK market is predicted to reach $235.34 million by 2030, with an annual growth rate of 10.73% from 2024 to 2030. This extraordinary growth is being driven by increased awareness of the benefits of MVHR, as well as the adoption of these systems to comply with the latest uplift to Building Regulations.
MVHR systems take a whole-house approach to ventilation, combining supply and extract ventilation into one system. They extract the stale air from wet rooms (kitchens, bathrooms, utility spaces) via ducting, transferring its heat to the fresh air being drawn into the building through heat exchanger. The filtered, pre-warmed air is then distributed around the home.
MVHR systems are a modern response to modern building practices. With ATs leading the charge to make properties more airtight and energy efficient, it is vital that good ventilation is designed into properties at the outset. If you are yet to be sold on these ventilation systems, allow me to present to you these key benefits:
[edit] Six reasons for using MVHR systems
[edit] Reason 1: Health
In the UK, we’re not an outdoors type of nation. In fact, we spend 80-90% of our time indoors. The air that we breath
indoors is therefore just as, if not more, important than the air we breathe outdoors, yet indoor air pollution can be up to five times higher than external.Sources of indoor air pollution are widespread and vary dramatically from house to house, but include cooking,cleaning products,furniture and outdoor emissions entering our homes. Then, of course, you have condensation and,in worst case scenarios,mould to contend with in the winter months.
Poor indoor air quality has been linked to an increased risk of respiratory and cardiovascular illness, cognitive impairment and certain cancers. England’s Chief Medical Officers Annual Report 2022 Air Pollution stated: “A better understanding of how we can prevent and reduce indoor air pollution should now be a priority”. It also noted “The role of ventilation is central to reducing unavoidable indoor air pollution.” MVHR systems are the most effective ventilation method for our homes as they both extract stale air and supply filtered ‘fresh’ air to key rooms, such as bedrooms. In urban areas that have high pollution levels, a NOX or PM2.5 pre-filter can be fitted in to the supply leg of an MVHR duct system to filter potentially dangerous pollutants from entering the home.Domus Ventilation’s NOX-FILT,for example, is highly effective as it prevents up to 99.5% of NO2 pollution from entering. Other steps that can be taken, as recommended in Building Regulations, include placing intake grilles away from the direct impact of the sources of local pollution.Areas in which urban traffic is the main source of that pollution,the air intakes should be as high as possible and located on the less polluted side of the building. Ventilation intakes should not be placed in courtyards or enclosed urban spaces where air pollutants are discharged.
[edit] Reason 2: Comfort
As we all know, breathing in poor quality air is not only unhealthy, it’s unpleasant. As stale air is usually the result of a buildup of chemicals (especially VOCs) and humidity, our homes feel stuffy and can have an unpleasant smell. Ironically, using an air freshener to combat this simply adds to the chemical concoction.MVHR systems are continuously on,removing that stale,humid air and its undesirable odours. During colder months they take the chill out of the supply air by passing it through a heat exchanger where the outgoing air’s energy is extracted and transferred. In the summer months,a 100% thermal bypass automatically activates when the air temperature reaches a pre-set level,allowing in cooler, fresh,filtered air without warming it through the heat exchanger.
[edit] Reason 3: Energy efficiency
By reusing the outgoing air’s heat to temper the incoming air, MVHR systems help reduce the home’s heating load too, with the Centre for Sustainable Energy estimating heating costs can be reduced by around 25%. Whilst MVHR running costs are dependent on the property size, building fabric, and occupant lifestyle,they are inexpensive to run.To ensure maximum energy efficiency is gained from an MVHR system though,it is important to correctly size,install and commission the unit, and use good quality ducting that is designed to work as part of that system.
[edit] Reason 4: Structural integrity
Whilst VOCs are unlikely to impact a building’s structure, persistent damp and mould can. If not dealt with, trapped condensation can lead to timber decay and can have a detrimental effect on insulation. More often though, it leads to mould growth on surfaces of walls and furniture. Removing large areas of mould is not easy and can be costly, especially when redecorating is required and furniture has to be replaced, with the mould likely to return as the source hasn’t been addressed. MVHR systems not only remove pollutants from homes,but also the humidity,reducing levels of condensation and preventing mould from forming in the first place.
[edit] Reason 5: Building Regulations
After changes to Building Regulations in June 2022, minimum ventilation rates have increased across all sizes of properties, reflecting the concern that previous ventilation levels were insufficient to reach all parts of a home (especially bedrooms overnight if doors are kept shut). In the case of larger properties,that increase is substantial.A five bedroom home, for example, has seen the minimum ventilation rate go from 29 to 43 litres per second. To achieve these new ventilation rates, mechanical ventilation systems such as MVHRs are the most proficient option. In larger properties, they are the only option!
[edit] Reason 6: Value-add
Thanks to campaign groups, scientists, and health professionals raising awareness,along with some high profile tragic cases where two children have died – one from air pollution and the other from mould in his home – the general public are more aware than ever of the importance of good air quality. Stories of extreme overheating in properties located in urban heat islands are also making national news. MVHR systems are an attractive proposition to home buyers who are worried about safety, providing them with good indoor air quality, added comfort and energy efficiency.
This article appears in the AT Journal issue 152 Winter 2024 as 'Six reasons you should be using MVHR systems' and was written by Paul Williams, Product Manager, Domus Ventilation.
--CIAT
[edit] Related articles on Designing Buildings
- Air conditioning.
- Air infiltration testing.
- Building services.
- Condensation.
- Cross ventilation.
- Displacement ventilation.
- Domestic ventilation systems performance.
- Exhaust air heat pump.
- Flanking sound.
- Heat recovery.
- Humidity.
- HVAC.
- Interstitial condensation.
- Mechanical ventilation.
- MVHR.
- Natural ventilation.
- Passivhaus.
- Passivhaus for affordable housing.
- Passivhaus Planning Package.
- Scotland mandates Passivhaus equivalent legislation.
- Stack effect.
- Thermal comfort.
- The UK's first passivhaus leisure centre.
- Understanding Passivhaus - review.
- Ventilation.
Featured articles and news
Timber in Construction Roadmap
Ambitious plans from the Government to increase the use of timber in construction.
ECA digital series unveils road to net-zero.
Retrofit and Decarbonisation framework N9 launched
Aligned with LHCPG social value strategy and the Gold Standard.
Competence framework for sustainability
In the built environment launched by CIC and the Edge.
Institute of Roofing members welcomed into CIOB
IoR members transition to CIOB membership based on individual expertise and qualifications.
Join the Building Safety Linkedin group to stay up-to-date and join the debate.
Government responds to the final Grenfell Inquiry report
A with a brief summary with reactions to their response.
A brief description and background to this new February law.
Everything you need to know about building conservation and the historic environment.
NFCC publishes Industry White Paper on Remediation
Calling for a coordinated approach and cross-departmental Construction Skills Strategy to manage workforce development.
'who blames whom and for what, and there are three reasons for doing that: legal , cultural and moral"
How the Home Energy Model will be different from SAP
Comparing different building energy models.
Mapping approaches for standardisation.
UK Construction contract spending up at the start of 2025
New construction orders increase by 69 percent on December.
Preparing for the future: how specifiers can lead the way
As the construction industry prepares for the updated home and building efficiency standards.
Embodied Carbon in the Built Environment
A practical guide for built environment professionals.