Dry-bulb temperature
Dry-bulb temperature (Tdb, DBT or Td), is a measure of air temperature. It is referred to as dry-bulb temperature because the thermometer bulb is dry and so the temperature recorded does not vary with the moisture content of the air. This is as opposed to wet-bulb temperature which is the temperature recorded by a thermometer that has its bulb wrapped in cloth and moistened with distilled water. Wet-bulb temperatures are the same as dry-bulb temperatures at a relative humidity of 100%, but otherwise wet-bulb temperatures will be lower than dry-bulb temperatures due to the cooling effect of evaporation (described as wet-bulb depression).
A sling psychrometer holds both wet and dry-bulb thermometers and can be used to express the physical and thermal properties of moist air on a psychrometric chart.
Dry-bulb temperature can be measured by a thermometer exposed to the air but shielded from radiation and moisture. It can be expressed in Celsius (C), Fahrenheit (F) or Kelvin (K).
Dry-bulb temperature can be used as to express a component of thermal comfort. For example, the wet bulb globe temperature index (WBGT) is widely used for the assessment of heat stress and combines wet-bulb temperature, dry-bulb temperature and globe temperature (mean radiant temperature).
[edit] Related articles on Designing Buildings
Featured articles and news
Moisture, fire safety and emerging trends in living walls
How wet is your wall?
Current policy explained and newly published consultation by the UK and Welsh Governments.
British architecture 1919–39. Book review.
Conservation of listed prefabs in Moseley.
Energy industry calls for urgent reform.
Heritage staff wellbeing at work survey.
A five minute introduction.
50th Golden anniversary ECA Edmundson apprentice award
Showcasing the very best electrotechnical and engineering services for half a century.
Welsh government consults on HRBs and reg changes
Seeking feedback on a new regulatory regime and a broad range of issues.
CIOB Client Guide (2nd edition) March 2025
Free download covering statutory dutyholder roles under the Building Safety Act and much more.
AI and automation in 3D modelling and spatial design
Can almost half of design development tasks be automated?
Minister quizzed, as responsibility transfers to MHCLG and BSR publishes new building control guidance.
UK environmental regulations reform 2025
Amid wider new approaches to ensure regulators and regulation support growth.
The maintenance challenge of tenements.
BSRIA Statutory Compliance Inspection Checklist
BG80/2025 now significantly updated to include requirements related to important changes in legislation.
Shortlist for the 2025 Roofscape Design Awards
Talent and innovation showcase announcement from the trussed rafter industry.