Brick veneer
A brick veneer, also known as a brick slip, is a thin layer of brick that is used aesthetically as a form of surface finish rather than structurally. Conventional brick walls typically support the structural loads of the building, whereas brick veneers are applied for decorative purposes.
They are generally formed from thin brick slips, which may be as little as 20 mm thick (compared to 102.5 mm for a standard brick). Brick veneers can be used for both indoor and outdoor applications and can be applied to almost any surface. A range of special brick slips are available for conditions such as corners, to continue the illusion that walls are constructed from full bricks.
For interior applications, such as around fireplaces, brick veneers may laid in a similar way to tiles. Mortar (or some other adhesive) is spread on the wall and the bricks are set into place on it, separated during drying by plastic spacers. Once bed mortar has set, the brick joints are pointed using more mortar. Other 'veneers' are available in rolls, as a form of three-dimensional wallpaper.
For exterior applications, the veneer may be laid in a similar way to internal applications, as a form of cladding. However, they may also be installed as a free-standing panels (often prefabricated off site, and sometimes including other components such as insulation), anchored back to the structural frame. This type of veneer is vertically self-supporting, but in multi-storey buildings, shelf angles may be used to provide a horizontal expansion joint, usually at the floor edges. This allows for expansion of the brick and potential shrinkage of the frame.
There are several advantages to using brick veneers:
- They are relatively easy and quick to install.
- They are not as heavy as other forms of masonry, which reduces structural loading.
- Cavities behind external brick veneers can aid insulation.
- They are durable and fire-resistant.
- They can achieve a wide range of decorative functions
- They require little maintenance.
Disadvantages include:
- They are more susceptible to damage as they are thinner than conventional brick walls.
- They do not contribute to structural integrity.
- They can be susceptible to water damage.
- Over time, the veneer will require re-pointing with new mortar.
[edit] Related articles on Designing Buildings
Featured articles and news
The benefits of writing articles for your organisation
How to create a profile for your organisation and publish for free.
No Falls Week. The importance of safe working at height
What to expect and what is on offer to avoid accidents.
Scottish Government action to reach net-zero targets
Retrofit expert group highlight critical actions needed.
A forward thinking, inclusive global community of members.
From engineered product life-spans, to their extension.
Circular economy in the built environment
A brief description from 2021. Where are we now?
Mental Health Awareness Week with ABS
Architects Benevolent Society programme of activity.
CLC publishes domestic retrofit competency framework
Roadmap of Skills for net zero.
May 13-19: Moving more for our mental health.
Understanding is key to conservation.
Open industry engagement survey seeks responses
Institutions and the importance of engagement.
National Retrofit Hub unveils new guide
Digital Building Logbooks and Retrofit: An Introduction.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Electrotechnical excellence, now open for entries.
Comments
There are many examples of brick slip failures from buildings constructed during the 1960s and 70s which have given slips a 'bad name'. Manufacturers of modern bricks slips are quick to point out that many lessons have been learned and that advances in adhesive and testing technologies have eliminated these fears. Despite this, an internal research study by materials specialist at Arup found that risks still exist around adhesively-bonded brick slip systems, and concludes by recommending the use of mechanically fixed (rather than adhesively fixed) systems only. A summary of the study is given here: https://www.linkedin.com/pulse/brick-slip-cladding-systems-safe-alexis-harrison/