Electrical wiring
[edit] Introduction
Electrical wiring is defined in the IET Wiring Regulations (BS 7671) as ‘wiring systems’, with the following definition:
‘An assembly made up of cable or busbars and parts, which secure, and if necessary, enclose the cable or busbars.’ |
Wiring as a term in such instances is usually taken to mean ‘cabling’ and the installation of cables within a building.
[edit] Cables and cabling
A cable, in the context of electrical installations in buildings, is an insulated conductor of electricity, usually copper or aluminium, with a protective casing which acts as an insulator. Cables are used to transmit electrical energy or data or telecommunications signals from one point to another.
The usual attributes of an electrical cable include:
- They are flexible enough to be drawn through or laid into a containment system.
- Where appropriate, they can be clipped directly or suspended from a building’s structure.
Flexible cables (often simply called flex cables), comprise finer strands of conductor material, and are used where regular movement or articulation is expected that could damage regular cables.
Cable insulation materials may comprise common plastics such as polyvinyl chloride (PVC), modified synthetic materials, or rubber. Other forms of insulation include mineral powder housed within a metallic outer casing.
The way different cables behave when subjected to fire conditions is the subject of extensive research. Toxic gas emissions, density of smoke and fire propagation speeds can vary widely with different forms of cable. This is a key consideration when selecting materials for buildings.
Since 2017, cables marketed and made available in the European Union (EU) must carry a ‘Euroclass’ classification, categorising their reaction to fire conditions.
--ECA
[edit] Related articles on Designing Buildings
- Arcing.
- Articles about electricity.
- Earthing.
- ECA articles.
- Electric.
- Electrical appliance.
- Electrical conduit.
- Electrical consumption.
- Electrical energy.
- Electrical equipment.
- Electrical installation.
- Electrical power.
- Electrical safety.
- Electrician.
- Electricity bill.
- Electrotechnical Assessment Specification guidance for installers.
- Grommet.
- IET announces release of 18th Edition Amendment 2.
- Panelboard.
- Premises wiring system.
- Ring circuit.
- Safe isolation for low voltage.
- What to know about foundation earthing.
Featured articles and news
Homes England creates largest housing-led site in the North
Successful, 34 hectare land acquisition with the residential allocation now completed.
Scottish apprenticeship training proposals
General support although better accountability and transparency is sought.
The history of building regulations
A story of belated action in response to crisis.
Moisture, fire safety and emerging trends in living walls
How wet is your wall?
Current policy explained and newly published consultation by the UK and Welsh Governments.
British architecture 1919–39. Book review.
Conservation of listed prefabs in Moseley.
Energy industry calls for urgent reform.
Heritage staff wellbeing at work survey.
A five minute introduction.
50th Golden anniversary ECA Edmundson apprentice award
Showcasing the very best electrotechnical and engineering services for half a century.
Welsh government consults on HRBs and reg changes
Seeking feedback on a new regulatory regime and a broad range of issues.
CIOB Client Guide (2nd edition) March 2025
Free download covering statutory dutyholder roles under the Building Safety Act and much more.
Minister quizzed, as responsibility transfers to MHCLG and BSR publishes new building control guidance.
UK environmental regulations reform 2025
Amid wider new approaches to ensure regulators and regulation support growth.
BSRIA Statutory Compliance Inspection Checklist
BG80/2025 now significantly updated to include requirements related to important changes in legislation.