Types of bolts
Contents |
[edit] Introduction
A bolt is a type of fastener, usually made from metal, that commonly comprises a head at one end, a chamfer at the other, and a shaft characterised by an external helical ridge known as a ‘thread’. Bolts are typically used to hold materials or objects together, or to position objects.
The chamfer at the opposite end of the head provides a slightly bevelled edge which helps with inserting the bolt into holes and nuts. Bolts typically (but not always) require a nut which is applied via torque while the bolt is held in place (or vice versa). Vibration or dynamic loads may loosen nuts, necessitating the use of locknuts, lock washers or thread lockers which can provide resistance to loosening.
[edit] Bolts and screws
The terms ‘bolts’ and ‘screws’ are sometimes used interchangeably, and the distinction between them can be complex, however, in simple terms, a bolt passes through the materials it is fixing together (typically into a nut at the other side), whereas a screw threads directly into them.
Bolts are often made of steel, and where resistance is required to weather or corrosion, they may be galvanised, or stainless steel, brass, zinc or titanium may be used.
[edit] Types of bolt
There are many different varieties of bolt which can be selected based on the particular requirement or the materials involved. Some of the most common types include:
[edit] Anchor bolt
Usually embedded in concrete or masonry for structural applications.
[edit] Carriage bolt
Used to fasten metal to timber, with a squared undercut to the head which holds the bolt in place once it has been tightened.
[edit] Elevator bolt
Commonly used in conveyor systems, an elevator bolt has a flat, plain or countersunk head which holds the bolt in place when tightened.
[edit] Flange bolt
Also known as frame bolts, this type of bolt distributes the bearing load using a washer on the undercut of the head.
[edit] Hanger bolt
This type of bolt comprises two threaded ends instead of having a head, one of which contains a wood screw.
[edit] Hexagon bolt/Tap bolt
A hexagon bolt comprises a head that has six sides, with threading that begins part-way down the shank, whereas a tap bolt’s shank is threaded the whole length.
[edit] Huck bolt
A proprietary bolt in which the pin and collar are swaged together using a specialist tool to form a permanent fixing.
[edit] Lag bolt
Also known as lag screws, this is a heavy-duty fastener that creates its own mating thread in timber and other soft materials when tightened.
[edit] Machine bolt
This type of bolt has a short shank and is intended for assembling metal components through predrilled holes.
[edit] Plow bolt
This type of bolt is commonly used in construction tools and other devices due to its durability, and is characterised by its flat countersunk head and square shank neck.
[edit] Sex bolt
Rather than requiring a nut, the shank of sex bolts are covered with a ‘mating’ female component. These are useful for fastening components that cannot be exposed to abrasive threads.
[edit] Square head bolt
This is similar to a machine bolt in that it has a short shank, in addition to a four-sided bolt head.
[edit] Stud bolt
This type of bolt has hexagon nuts on both ends. Components are fastened between the two bolts.
[edit] Timber bolt
Bolts that are meant for use with large timber components.
[edit] T-head bolt
Has a T-shaped head which can be gripped by a wench and can fit into a slot with ease.
[edit] Toggle bolt
This type of bolt has an expanding wing-like nut which helps it to mount objects to walls.
[edit] U-bolt
Similar to staples, U-bolts are bent in the shape of a ‘U’ and are partially threaded on both ends.
[edit] Bolt heads
Different types of head include:
- Square shoulder: A truss head, shaped so as to allow fastening with the least amount of surface obstruction, on a square shank which resists rotation.
- Indented hexagon: For use with a wrench, this head has a circular depression in its top surface.
- Indented hexagon washer: Same as an indented hexagon, but with the addition of a washer section at the base to protect the assembly finish from the wrench.
- Hexagon (trimmed): Standard type of head, with clean corners that are trimmed to close tolerances.
- Hexagon flange: Similar to the indented hexagon washer, but the washer is conical or slightly rounded.
[edit] Related articles on Designing Buildings
- Adhesive.
- Clamp.
- Construction equipment.
- Construction staples.
- Construction tools.
- Cramp.
- Crimp.
- Fittings.
- Fixture.
- Fixing v fastening.
- Nails - a brief history.
- Off-site prefabrication of buildings: A guide to connection choices.
- Rivet.
- Staple.
- Strap.
- Structural fasteners.
- Structural steelwork.
- Types of fixings.
- Types of nails.
- Types of nuts.
- Types of screws.
- Types of washer.
- Welding.
Featured articles and news
The continued ISG fall out, where to go?
Support for ISG contractors, companies and employees.
New HES national centre for traditional building retrofit
Announced as HES publishes survey results which reveal strong support for retrofit.
Retrofit of Buildings, a CIOB Technical Publication
Expected to become one of the largest activities in the global construction industry.
The ECA industry focus video channel
Keeping update with the industry session by session.
Over 25 recorded informations sessions freely available.
AT Awards 2024 ceremony East London October 25th.
Revisiting the AT community at the 2023 awards evening.
The Community Housing Fund and built affordable homes
CLTN reviews the impact of the Fund and calls for extension.
The grading system of the Regulator for Social Housing
A background, an explanation and ten recent enforcements.
Construction, repair and maintenance. Book review.
Putting new life into a city with a 1900 year history.
BSRIA Briefing 2024: Sustainable Futures speakers
Redefining Retrofit for Net Zero Living 22 Nov.
Wall of support for post-Grenfell regulation of electricians
Call for a shake-up of the construction industry highlighted on radio.
Digital sustainability through future AEC tools
Bringing together industry and academia to meet challenges.
Skills gap for net zero highlighted to Minister for Industry
ECA convenes roundtable discussion at Portcullis House.
Evidencing Net Zero with the new UK buildings standard
Pilot version with detailed excel proforma out now!
Scottish Building Safety Levy, in consultation
From direct remediation and the RPDT, to the costs and alternatives.
Waves of warmer homes grants for the rental sector
Boosting energy efficiency standards for all rented homes.
A refocus of the National Planning Policy Framework
Key terms described in brief, as the consultation closes the evening of the 24th.
Fortified farmhouses of the unruly 16th-and 17th-century borders.
Comments
Hi There,
Your content is very informative and appreciated. I am looking for information about different types of bolts and luckily I found your article. Thanks for sharing.