Types of nuts
A nut is a fastener that consists of a block with a threaded hole in the centre. The hole contains ‘female’ threads that typically correspond to the ‘male’ threads of a bolt or screw. Nuts are used with their ‘mating’ bolt or screw to fasten materials together.
The most common shape for a nut is hexagonal, as six sides provide more angles for a tool to approach from, although the corners can be more vulnerable to becoming rounded off over time which makes them less easy to use with tools. Square nuts can also be used but are less common.
Vibration or rotation can have the effect of loosening a nut over time and so different locking mechanisms can be used, including:
Nuts are used for many different applications and so there are a wide variety of different types. Some of these include:
- Basic hex nut: A six-sided nut, and the most common type. There are several variations such as the nylon insert lock which helps secure the nut in place.
- Wing nut: The head of a wing nut has two ‘wings’ on each side, enabling it to be tightened and loosened by hand. Mainly used for temporary fastening.
- Cap nut: This type of nut is closed at one end with a smooth-domed top.
- Acorn nut: Similar to a cap nut but the rounded end has a higher crown.
- Barrel nut: Also known as a dowel nut, this has a round ‘slug’ with threads perpendicular to its length.
- Cage nut: A spring steel cage wraps around the nut with wings that can be used to compress and release the nut.
- Coupling nut: A threaded fastener for joining two male threads together, such as in pipework, or to make long rod assemblies from shorter lengths.
- Flange nut: A wide flange at one end acts as an integrated washer, distributing the pressure of the nut over the part being secured.
- Insert nut: Inserted into a pre-drilled hole to provide a threaded socket.
- Split nut: Split into two pieces to allow the female thread to open and close over the male thread of a bolt or screw.
- Square nut: A four-sided nut which provides greater resistance to loosening.
- Swage nut: Also known as a self-clinching nut, this is used to permanently anchor itself onto sheet metal.
- T-nut: A long, thin body with a T-shaped flange at one end which digs in, leaving a flush surface.
- Weld nut: A specialised nut that can be welded to another component.
[edit] Related articles on Designing Buildings Wiki
- Clamp.
- Construction equipment.
- Construction staples.
- Construction tools.
- Crimp.
- Furniture, fixtures and equipment.
- Nails - a brief history.
- Off-site prefabrication of buildings: A guide to connection choices.
- Rivet.
- Staple.
- Strap.
- Structural fasteners.
- Structural steelwork.
- Types of bolts.
- Types of fixings.
- Types of nails.
- Types of screws.
Featured articles and news
Designing sustainability and performance into buildings
Specifying and selecting sustainable resilient timber products.
Modifying wood to improve resistance to decay and movement.
A last minute, long look for built environment professionals.
The architecture of creative reuse. Book review.
Installing solar panels on listed structures.
Sustainable development global goals, history in progress?
"Unless we act now, the 2030 Agenda will become an epitaph for a world that might have been."
Mike Kagioglou FCIOB named CIOB President
'Sustainable Development Goals must be focus for construction'
BSRIA training; a look at what's on offer
From energy management to compliance training.
TESP video warns to beware of rogue trainers.
Highlighting the slippery tactics of non-approved providers.
New Building Safety Wiki launched
Boosting awareness and understanding of the new fire safety regime.
New playbook on AI in construction published by CIOB
How to get to grips with, and the best from AI.
Digital Construction Report NBS
BIM, cloud, off-site, immersive tech, AI, twins and sustainability.
ECA learning zone and industry focus video series
From updates and amendments to circular economy, emergency lighting and much more.
Comments
Wow, Nice blog. keep it up.
https://www.dicfasteners.com/wing-nuts.php