Economy 7
Contents |
[edit] Introduction
Economy 7 (E7) is a reduced rate off-peak differential or multi-rate tariff for electricity consumed during 7 hours overnight, when the electricity is in low demand and at its base load. The tariff requires a special meter with two different readings, one low (for the night rate) and one normal (for the standard day rate). It is usually found in homes that use electricity for both heating and hot water, often because the local area does not have access to gas.
[edit] Night storage
The heating system that is usually installed alongside E7 uses night storage heaters, which contain high thermal mass materials such as bricks, which are heated overnight when the electricity rate is cheaper. They retain this heat and release it during the day, in some cases with a small electrical fan (running on the normal tariff) to act as a blow heater. In standard night storage heaters once the bricks have exhausted their heat and cooled down the the heat source has run out until it can be heated again overnight, but some models also include standard heating elements meaning they can be used during the day but at the higher tariff.
[edit] Background
The term Economy 7 was coined by Jon Marshall, first mentioned of in 1978 and recorded in the book "Electricity Supply in the UK: A chronology by the now-defunct association of nationally-owned electricity companies; The Electricity Council. "A new off-peak tariff known as the 'Economy 7' tariff was introduced in October [1978]. It featured a seven-hour night rate some 20 per cent cheaper than most night-time tariffs, made possible by economies in the night-time operation of the system."
[edit] Other similar meters and tariffs
There are also a number of other reduced rate tariffs, which are usually determined by the geographical area of location in the UK as well as the type of meter that is installed. The most similar by name and nature is the Economy 9 (E9) which offers 9 hours of reduced rate tariff, as opposed to 7 hours. Off-peak (type 1, type 2 and type U), similarly offer differing rates between day and night as does Warmwise, offering 8 hours at a reduced rate.
These types of meter and tariff systems might also be referred as a complex tariffs and complex meters, because of the different rates and ways of measuring they offer.
Economy 10 tariff (E10), similar by name is yet more complex as it offers three different rates which amount in total to 10 hours, such as; three off-peak hours in the afternoon (e.g. 1pm - 4pm), two in the evening (e.g. 8pm - 10pm) and five overnight (e.g. 12am - 5am), Heatwise runs in the Midlands on a similar principle.
It is now possible to instal smart meters that also run on economy 7, 9 or 10 tariffs although they are less common.
[edit] Related articles on Designing Buildings
- Smart electricity tariffs
- Can we keep the lights on.
- Changing patterns in domestic energy use FB 76
- Developing system intelligence for optimising building electricity networks
- Economy 7, 9 and 10
- Electricity generation
- Electricity supply
- Empower community energy management.
- Energy Use Intensity
- Energy targets for buildings.
- Smart grid electricity network
- The key trends making our cities greener, safer and smarter
- The Future of Electricity in Domestic Buildings
- The use of batteries to store electricity for buildings
- TV pickup
Featured articles and news
Twas the site before Christmas...
A rhyme for the industry and a thankyou to our supporters.
Plumbing and heating systems in schools
New apprentice pay rates coming into effect in the new year
Addressing the impact of recent national minimum wage changes.
EBSSA support for the new industry competence structure
The Engineering and Building Services Skills Authority, in working group 2.
Notes from BSRIA Sustainable Futures briefing
From carbon down to the all important customer: Redefining Retrofit for Net Zero Living.
Principal Designer: A New Opportunity for Architects
ACA launches a Principal Designer Register for architects.
A new government plan for housing and nature recovery
Exploring a new housing and infrastructure nature recovery framework.
Leveraging technology to enhance prospects for students
A case study on the significance of the Autodesk Revit certification.
Fundamental Review of Building Regulations Guidance
Announced during commons debate on the Grenfell Inquiry Phase 2 report.
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.
CIOB photographic competition final images revealed
Art of Building produces stunning images for another year.
HSE prosecutes company for putting workers at risk
Roofing company fined and its director sentenced.
Strategic restructure to transform industry competence
EBSSA becomes part of a new industry competence structure.
Major overhaul of planning committees proposed by government
Planning decisions set to be fast-tracked to tackle the housing crisis.
Industry Competence Steering Group restructure
ICSG transitions to the Industry Competence Committee (ICC) under the Building Safety Regulator (BSR).
Principal Contractor Competency Certification Scheme
CIOB PCCCS competence framework for Principal Contractors.
The CIAT Principal Designer register
Issues explained via a series of FAQs.