Structural opening
Contents |
[edit] Use of the term
The term structural opening (SO), sometimes also called rough opening, refers to the size of an opening in a wall or facade where a window or door or other unit will be installed. It is normally slightly larger than the actual unit size to allow for tolerances in construction. Structural openings are called this such because their edges generally meet with structural elements of the building such as columns, walls, beams, lintels and so on.
[edit] Finished opening
The term finished opening (FO) is similar to structural opening in that it is the opening that will house a unit such as a window in a facade or wall. Although in this case the opening may have been prepared in some way rather than being a raw structural opening, for instance with fixing of plywood boxing, plaster or render between the structural element and the location of the window or other unit.
[edit] Tolerances
The width of a structural opening to the edge of brick and blockwork might be 910mm, the finished opening may have a lining of 10mm creating a finished opening that is 900mm wide, whilst the unit size that is intended to be installed is 890mm wide, leaving <5mm tolerance on all sides.
NHBC guidance 9.1.4 Doors and windows discusses appropriate tolerances of <3mm on one side to the other of an opening: "Doors and windows shall be installed to appropriate tolerances, including openings in walls and external openings viewed from the inside."
[edit] Thermal performance
It should be noted that a window or any unit installed into a structure can have an impact on fabric performance, as the opening punctuates the building fabric from inside to outside. Psi ( or ψ value) denotes heat loss over a given length rather than a given area. The thermal performance of a window should be calculated including an adjustment for the interface between the window unit and the structural or finished opening, this installation adjustment is often known as the window or installation Psi (ψw). It is an adjustment to the thermal performance of a window allowing for heat loss along the linear junction between the installed window and the edge of the opening.
[edit] Related articles on Designing Buildings
- Elements of structure in buildings
- Principles of enclosure.
- Structure.
- Structural systems.
- Superstructure.
- Types of structure.
- Types of door.
- Windows.
[edit] External references
Featured articles and news
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Heat pumps, vehicle chargers and heating appliances must be sold with smart functionality.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
New-style degrees set for reformed ARB accreditation
Following the ARB Tomorrow's Architects competency outcomes for Architects.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.
Preserving, waterproofing and decorating buildings.
Many resources for visitors aswell as new features for members.
Using technology to empower communities
The Community data platform; capturing the DNA of a place and fostering participation, for better design.
Heat pump and wind turbine sound calculations for PDRs
MCS publish updated sound calculation standards for permitted development installations.
Homes England creates largest housing-led site in the North
Successful, 34 hectare land acquisition with the residential allocation now completed.
Scottish apprenticeship training proposals
General support although better accountability and transparency is sought.
The history of building regulations
A story of belated action in response to crisis.
Moisture, fire safety and emerging trends in living walls
How wet is your wall?
Current policy explained and newly published consultation by the UK and Welsh Governments.
British architecture 1919–39. Book review.
Conservation of listed prefabs in Moseley.
Energy industry calls for urgent reform.