Non-freezing cold injury NFCI
Contents |
[edit] Introduction
Non-freezing cold injuries, or NFCIs, are injuries that occur when a person is subject to prolonged exposure to cold temperatures that are insufficient to cause freezing. Most cases of NFCI involve the feet, injured hands and other exposed areas of skin. NFCIs may coexist with freezing cold injuries, or FCIs. Both incidents can generally be prevented with proper preparation for outdoor activities in a cold environment. On construction sites, key preventive measures focus on suitable protective clothing.
[edit] Most common NFCIs
There are two primary NFCI conditions that can occur: chilblains and trench foot. In both cases the affected area experiences restricted blood flow due to exposure to cold temperatures and damp conditions.
Chilblains are caused by repeated exposure to the cold and most commonly occur on the face, hands or feet. Exposure results in constriction of the small arteries and veins in the skin. Subsequent re-warming results in leakage from the blood vessels into the tissues, which in turn causes inflammation and swelling of the skin. Chilblains characteristically develop several hours after exposure to cold temperatures and high levels of humidity.
Trench foot (or cold immersion foot or hand) is associated with injuries sustained in wet conditions at non-freezing temperatures. It can occur following protracted immersion in cold water, usually at 0°C to +10°C, which can result in prolonged peripheral vasoconstriction.
[edit] Four stages of NFCI
The four distinct stages of NFCI are:
- During cold exposure. At this stage, temperatures may cause the affected tissue to become cold and numb. The area may appear bright red, but could then fade to a paler colour; in some instances the area may appear almost white.
- Following cold exposure. This stage occurs during a period of warming. The affected area changes colour from white to pale blue and remains cold and numb. Swelling may begin to appear.
- Hyperaemia. This stage can last for an extended period, ranging from two weeks to three months. The affected area becomes swollen with hot, red and dry skin - possibly with the occurrence of blisters - and intense pain may be experienced. In extreme cases, skin may start to become gangrenous.
- Following hyperaemia. Lasting for weeks or possibly years, the final stage of NFCI may persist throughout the person’s life. Physical signs may no longer be apparent, but damaged areas may be permanently sensitive to cold temperatures; in extreme cases, amputation may be necessary.
[edit] Legal considerations associated with NFCIs
UK law does not prescribe maximum or minimum temperatures. Temperatures in the workplace are governed by the Workplace (Health, Safety and Welfare) Regulations 1992, but this simply obliges employers to provide a ‘reasonable’ temperature.
NFCI is one risk associated with exposure to low temperatures. Where thermal conditions mean that the natural measures necessary to regulate internal human temperature begin to fail, this can be described as ‘thermal stress’, such as cold stress. If there is a risk of thermal stress, this must be assessed and managed. In the case of cold stress, this might include conditions that are below 12°C.
Additional legal requirements can be found in:
- The Personal Protective Equipment at Work Regulations 1992 which cover PPE assessments and requirements for cold working conditions.
- Management of Health and Safety at Work Regulations 1999 which cover risk assessments for cold working conditions.
- Construction (Design and Management) Regulations 2015:Temperature and weather protection (S34) provides suggested parameters - including the provision of protective clothing - for reasonable construction site weather-related working conditions both indoors and out.
[edit] Related articles on Designing Buildings
- CDM 2015.
- Cold stress.
- How to work safely on a construction site in winter.
- Management of Health and Safety at Work Regulations 1999.
- Maximum and minimum workplace temperatures.
- The Personal Protective Equipment at Work Regulations 1992.
- Workplace (Health, Safety and Welfare) Regulations 1992.
[edit] External resources
- Ministry of Defence, Synopsis of Causation: Cold Injury by Dr Adrian Roberts.
Featured articles and news
Twas the site before Christmas...
A rhyme for the industry and a thankyou to our supporters.
Plumbing and heating systems in schools
New apprentice pay rates coming into effect in the new year
Addressing the impact of recent national minimum wage changes.
EBSSA support for the new industry competence structure
The Engineering and Building Services Skills Authority, in working group 2.
Notes from BSRIA Sustainable Futures briefing
From carbon down to the all important customer: Redefining Retrofit for Net Zero Living.
Principal Designer: A New Opportunity for Architects
ACA launches a Principal Designer Register for architects.
A new government plan for housing and nature recovery
Exploring a new housing and infrastructure nature recovery framework.
Leveraging technology to enhance prospects for students
A case study on the significance of the Autodesk Revit certification.
Fundamental Review of Building Regulations Guidance
Announced during commons debate on the Grenfell Inquiry Phase 2 report.
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.
CIOB photographic competition final images revealed
Art of Building produces stunning images for another year.
HSE prosecutes company for putting workers at risk
Roofing company fined and its director sentenced.
Strategic restructure to transform industry competence
EBSSA becomes part of a new industry competence structure.
Major overhaul of planning committees proposed by government
Planning decisions set to be fast-tracked to tackle the housing crisis.
Industry Competence Steering Group restructure
ICSG transitions to the Industry Competence Committee (ICC) under the Building Safety Regulator (BSR).
Principal Contractor Competency Certification Scheme
CIOB PCCCS competence framework for Principal Contractors.
The CIAT Principal Designer register
Issues explained via a series of FAQs.