Domestic building services compliance guide
The Domestic Building Services Compliance Guide is a government publication that provides guidance on the installation of building services in new and existing properties to assist in complying with the energy efficiency requirements of the Building Regulations.
It provides more detailed information on the guidance contained in Approved Document L1A: Conservation of fuel and power in new dwellings, and Approved Document L1B: Conservation of fuel and power in existing dwellings.
The Domestic Building Services Compliance guide 2013 edition (incorporating 2018 amendments) came into effect on 6 April 2018.
The guide is concerned with the installation of:
- Space heating.
- Domestic hot water.
- Mechanical ventilation.
- Comfort cooling.
- Internal and external lighting.
- Low-carbon heat generation through the use of heat pumps, solar thermal panels and micro-combined heat and power units.
It sets out recommended minimum energy efficiency standards for components of building services systems, including controls. For systems installed in new buildings, the standards are design limits. For new or replacement systems and components installed in existing buildings, the standards represent reasonable provision for complying with the building regulations.
It also provides supplementary information regarding good practice that exceeds the minimum standards, such as Microgeneration Certification Scheme standards.
The guide is broken down into four fuel-based sections and nine technology-specific sections:
Fuel based:
- Section 2 Gas-fired space and water heating.
- Section 3 Oil-fired space and water heating.
- Section 4 Electric heating.
- Section 5 Solid fuel heating.
Technology-specific:
- Section 6 Community heating.
- Section 7 Underfloor heating.
- Section 8 Mechanical ventilation.
- Section 9 Heat pumps.
- Section 10 Comfort cooling.
- Section 11 Solar water heating.
- Section 12 Lighting.
- Section 13 Micro-combined heat and power.
- Section 14 Heating system circulators.
Relevant European and UK legislation in relation to fixed building service product design and fitting include:
- The Ecodesign Directive 2009/125/EC which provides a background for establishing the requirements for ‘energy related’ products.
- Energy Labelling Directive 2010/30/EU – This provides a system for labelling energy-related products such as lamps and washing machines.
- Renewable Energy Directive 2009/28/EC – This promotes the use of energy from renewable sources.
- Energy Efficiency Directive 2012/27/EU – This encourages energy efficiency to ensure the EU meets its commitment to achieve a 20% energy consumption reduction by 2020.
- Energy Performance of Buildings Directive 2013/31/EU – This directive sets out minimum energy performance standards and the methods for calculating the performance of buildings, as well as inspections of heating and air conditioning units.
The 2018 amendments introduced revised standards for when gas-fired and oil-fired boilers are installed or replaced in existing dwellings.
See also: Non-domestic building services compliance guide.
[edit] Related articles on Designing Buildings
- Approved documents.
- Building services.
- Building services compliance with the building regulations.
- Cooling.
- Energy related products directive.
- Heating.
- Heat pump.
- Mechanical ventilation.
- Microgeneration.
- Microgeneration certification scheme.
- Non-domestic building services compliance guide.
- Solar thermal systems.
- Types of building services.
Featured articles and news
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Heat pumps, vehicle chargers and heating appliances must be sold with smart functionality.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
New-style degrees set for reformed ARB accreditation
Following the ARB Tomorrow's Architects competency outcomes for Architects.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.
Preserving, waterproofing and decorating buildings.