Thermoplastic materials in buildings
Approved document B, Fire Safety, Volume 1 Dwelling houses, defines a thermoplastic material as:
'Any synthetic polymeric material that has a softening point below 200°C if tested to BS EN ISO 306 Method A120. Specimens for this test may be fabricated from the original polymer where the thickness of material of the end product is less than 2.5mm.'
Acrylics are an example of thermoplastic materials. Acrylics are chemicals that contain the acryloyl group, derived from acrylic acid, such as polyacrylonitrile and poly(methyl methacrylate) (PMMA). They generally have good optical clarity, scratch resistance, dimensional stability and rigidity. They are do not deteriorate in sunlight and they have good adhesion, are thermoplastic, easy to form and cut into a variety of shapes. However, they are combustible, are not flexible, suffer from stress cracking and are not resistant to solvents.
Acrylics have a very wide range of uses in the construction industry:
- Transparent or translucent sheeting such as acrylic glass (‘Plexiglass’ or ‘Perspex’).
- Opaque cladding and panel materials.
- Paints.
- Resins, sealants, adhesives and adhesive tapes
- Flashing materials.
- Concretes, mortars, renders and asphalt.
- Architectural fabrics.
- Baths, shower trays and sinks.
- Coatings for metals, concrete and masonry.
- Flooring and carpets.
- Worktops.
- Signage.
- Light fixtures.
- LCD screens.
- Furniture.
[edit] Related articles on Designing Buildings Wiki
- Acrylic.
- Adhesives.
- Composites.
- ETFE.
- Expanded polystyrene.
- Fabric structures.
- Glass reinforced plastic GRP.
- India looks at using plastic instead of sand.
- Nylon.
- Paint.
- Polycarbonate.
- Polyethylene.
- Polymers.
- Polypropylene.
- Polyvinyl chloride (PVC).
- Stretched-skin ceiling.
- Transparent insulation materials.
Featured articles and news
HSE simplified advice for installers of stone worktops
After company fined for repeatedly failing to protect workers.
Co-located with 10th year of UK Construction Week.
How orchards can influence planning and development.
Time for knapping, no time for napping
Decorative split stone square patterns in facades.
A practical guide to the use of flint in design and architecture.
Designing for neurodiversity: driving change for the better
Accessible inclusive design translated into reality.
RIBA detailed response to Grenfell Inquiry Phase 2 report
Briefing notes following its initial 4 September response.
Approved Document B: Fire Safety from March
Current and future changes with historical documentation.
A New Year, a new look for BSRIA
As phase 1 of the BSRIA Living Laboratory is completed.
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from construction and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.