E-spring
Vehicle suspension has always relied on conflicting requirements such as; passenger comfort, road holding and load carrying, to be in balance. This intricate balance has long been a contentious issue for engineers. Suspension springs are designed to absorb shock from the road by compression and extension when bumps are encountered.
The spring rate has a large impact on the performance of a vehicle in relation to these factors. A low spring rate can increase passenger comfort, but at the detriment of the other factors and a high spring rate with a heavy load causes excessive bumps. Variation in spring rate, therefore, would be a great aid to vehicle suspension.
Such a concept has been created in the by Cambridge postgraduate researcher Salah Elmoselhy’s concept of the E-spring.
The concept behind the E-shaped spring is that it can offer the variation needed in spring rate to give the best experience for both passenger comfort, road holding and load bearing. The unique shape means that some sections flex easily under light loads whilst another can increase the stiffness as the load increases.
Such a shape avoids undue stress and can contribute to the longevity of the spring and thus improve vehicle performance. Further improvements to suspension can be made the more E-springs that are used.
There are many benefits that the new E-spring can bring to car suspension. Weight reduction of up to 80% can lead to a long-term reduction of fuel consumption, making vehicles more efficient. It also means that there is a much-reduced space requirement, leaving more room for safety equipment and other such necessities.
The compact space of the E-spring means that variable loads can be moved and passenger comfort never has to be sacrificed. This, removes the need for hydraulic dampeners and improves the overall fatigue performance of vehicles.
The scalability of this spring also means that it can be used in items as small as semiconductor chips for smarter technology.
[edit] Find out more
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Many resources for visitors aswell as new features for members.
Using technology to empower communities
The Community data platform; capturing the DNA of a place and fostering participation, for better design.
Heat pump and wind turbine sound calculations for PDRs
MCS publish updated sound calculation standards for permitted development installations.
Homes England creates largest housing-led site in the North
Successful, 34 hectare land acquisition with the residential allocation now completed.
Scottish apprenticeship training proposals
General support although better accountability and transparency is sought.
The history of building regulations
A story of belated action in response to crisis.
Moisture, fire safety and emerging trends in living walls
How wet is your wall?
Current policy explained and newly published consultation by the UK and Welsh Governments.
British architecture 1919–39. Book review.
Conservation of listed prefabs in Moseley.
Energy industry calls for urgent reform.
Heritage staff wellbeing at work survey.
A five minute introduction.
50th Golden anniversary ECA Edmundson apprentice award
Showcasing the very best electrotechnical and engineering services for half a century.
Welsh government consults on HRBs and reg changes
Seeking feedback on a new regulatory regime and a broad range of issues.
CIOB Client Guide (2nd edition) March 2025
Free download covering statutory dutyholder roles under the Building Safety Act and much more.