Mortice lock
|
| A common lever-type mortice lock in the UK. |
Contents |
[edit] Introduction
A mortice lock (or mortise lock) is a lock that is carved or cut into a pocket on the side of a door or piece of furniture. This type of lock is sometimes used as a second lock for increased security and is commonly found in residential applications.
[edit] History
The mortice lock was commonly used in older buildings in the United States. Two of the country’s early presidents, Thomas Jefferson and James Madison both mentioned mortise locks as their security devices of choice. In 1788, Thomas Jefferson wrote to John Trumbull to request “mortise locks” on a carriage he wanted made to his specifications.
In 1798, James Madison included a reference to the devices (“mortise locks which I accordingly prefer”) in a letter to Jefferson. The letter followed with a review of matters of state. The discussion of locks came before the discussion of politics.
[edit] Operation
The locking body of a mortice lock is installed in the door, piece of furniture or other object while the box keep is installed in the facing frame. The mortice lock works by projecting its locking device (or lever) into the corresponding space on the facing side of the door frame or other object. A key is often used to operate the bolting mechanism and move it into the locked or unlocked position.
Mortice locks can create a layer of security on top of that which has been provided by standard cylindrical locks. Commonly available in deadlock and sashlock varieties, mortice locks are used in residential and commercial properties throughout the United States and Europe.
NB Code of practice: Hardware for fire and escape doors, Issue 5, published by DHF and GAI in November 2024, defines a deadlock as a: ‘Lock that contains only a deadbolt.’ Where a deadbolt is a: ‘Bolt that is operated in both directions by a key, handle and/or thumb turn.’
[edit] Related articles on Designing Buildings
Featured articles and news
Designing for neurodiversity: driving change for the better
Accessible inclusive design translated into reality.
RIBA detailed response to Grenfell Inquiry Phase 2 report
Briefing notes following its initial 4 September response.
Approved Document B: Fire Safety from March
Current and future changes with historical documentation.
A New Year, a new look for BSRIA
As phase 1 of the BSRIA Living Laboratory is completed.
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from constructuon and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.
The increasing costs of repair and remediation
Highlighted by regulator of social housing, as acceleration plan continues.
Free topic guide on mould in buildings
The new TG 26/2024 published by BSRIA.
Greater control for LAs over private rental selective licensing
A brief explanation of changes with the NRLA response.
Practice costs for architectural technologists
Salary standards and working out what you’re worth.
The Health and Safety Executive at 50
And over 200 years of Operational Safety and Health.
Thermal imaging surveys a brief intro
Thermal Imaging of Buildings; a pocket guide BG 72/2017.