Specifier's Guide to Drylining
Contents |
[edit] Who is the Specifiers’ Guide to Drylining for ?
Specifiers’ Guide – Drylining was published by the Finishes and Interiors Sector (FIS) in 2022.
The guide was written and produced by the FIS Drylining Working Group which comprises representation from manufacturers, designers and contractors working in the drylining sector.
The guide will help specification writers fully understand the criteria when writing a specification for drylining, including partitions, wall linings and shaft wall systems. Pulling together decades of experience, it is designed to help specifiers and designers understand the questions that should be addressed before the specification can be produced and then how the specification should be structured, and which standards referenced. The guide includes top tips when specifying drylining, as well as reference material to regulations for safety, fire performance and standards.
[edit] Comments on the publication
Iain McIlwee, FIS Chief Executive said: “Specifying drylining seems, on the face of it, simple enough: consider the look, performance and cost, and there it is. If only it were that simple there would not be cases where evidence of fire compartmentation could fail or fail to perform because the issue wasn’t apparent during the specification process.”
“A well written specification not only ensures the installation meets the client’s requirements, but it also means the specifier’s requirements are less open to interpretation, which is key for the whole supply chain if they are going to deliver the quality and detail first time, on time,” added Iain McIlwee.
[edit] Guide contents
The contents of the guide are:
- Foreword
- Introduction
- Scope
- RIBA plan of work
- The Specificaton
- Design Considerations
- Performance
- Design for security
- Other Material Characteristics
- Materials
- Drylining Systems
- Finishing
- Doors
- Project Planning
- Competence
- Checklist
- Appendix
- Glossary
The guide sits alongside other FIS best practice guides that relate to drylining including:
These guides work well when they are included in proposals and project plans to demonstrate how to best approach a project. The Specifiers’ Guide – Drylining is available for download here
For further information or for any questions please contact FIS at [email protected] or contact construction marketing communications agency Fabrick
--FIS
[edit] Related articles on Designing Buildings
Featured articles and news
Industry survey highlights persistent skills gap
Building engineering business survey by ECA in partnership with BESA, SELECT and SNIPEF.
IHBC Conservation Professional Practice Principles
Spotlighted in HEF Historic Environment Overview.
CIAT collaborates with CIOB, CIfA, Icon to launch The Arc
Helping clients find specialist historic environment professionals.
Government building safety remediation data releases
Show some progress, but a 50% gap not yet started.
Testing For A Safer Future; an initial industry response
A response to the Independent Review of the Construction Product Testing Regime.
Requirements for UK buildings in certain circumstances.
CLC guidance for dutyholders and accountable persons.
Types of contractor in the construction industry
A long list, but are any missing ?
The Housing (Cladding Remediation) (Scotland) Bill 2023
Unanimously approved to legislation on May 14, 2024.
Asset information requirements AIR
In detail, with links to further resources.
Where it's AT Building Safety podcasts from CIAT
Unravelling the Golden Thread and CIAT’s Principal Designer Register for non-HRBs and HRBs.
What happened to Hadrian's Wall?
Its former stones can be found in buildings near its route.
Strategic ventilation in modern building design
Download your free guide.
Four new types of prior approval for solar developments
Online Planning Portal application types from 5 September.
Comments
[edit] To make a comment about this article, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.