Metric system
|
Contents |
[edit] Introduction
The metric system is a decimalised measurement system used widely throughout the world for weights and measures in everyday life, trade, science and industry. It can be used for example to express the weight of vegetables, the speed of a train, the height of a child, the intensity of light, the volume of water and so on.
One of the benefits of the metric system is its relative ease of understanding and application. Being a decimalised system, it is based on the power of 10 and parts of ten. So, there are 10 millimetres (mm) in a centimetre (cm); 100 centimetres in a metre (m) and 1,000 metres in a kilometre (km).
This can be contrasted with the relative complexity of the Imperial system which was based on irregular bases, eg 12 pence in a shilling, 20 shillings in a pound (240 pence); 12 inches in a foot (ft), three feet in a yard (yd) and 1,760 yards (yds) in a mile.
The imperial system also involved fractions that were more problematic when adding up, eg 1ft 3 3/4in plus 4ft 3 5/8in equals 5ft 7 3/8in. The metric equivalent of this addition is 396mm + 1310mm = 1706mm or 1.706m.
[edit] International System of Units
The term ‘metric system’ has been superseded by the ‘International System of Units (SI)’ and the units that are used for measuring, such as kilograms and metres, are called SI Units.
There are seven SI base units that form the foundation of the metric system:
| Quantity measured | Unit | Symbol |
| Length | metre | m |
| Mass | kilogram | kg |
| Time | second | s |
| Electrical current | ampere | A |
| Thermodynamic temperature | kelvin | K |
| Amount of substance | mole | mol |
| Luminous intensity | candela | cd |
From the seven SI base units in the table above, other quantities can be derived (derived quantities) by using quantity equations to cover other measurement requirements:
[edit] Derived units
| Entity | SI derived unit | Symbol |
| Area | square metres | m2 |
| Volume | cubic metres | m3 |
| Speed, velocity | metres per second | m/s |
| Mass density | kilogram per cubic metre | kg/m3 |
| Specific volume | cubic metre per kilogram | m3/kg |
| Luminance | candela per square metre | cd/m2 |
| Current density | ampere per metre | A/m |
| Dynamic temperature | degree Celsius | °C |
Some SI derived units have been given special names and symbols such as watt (W) to represent power and radiant flux; joule (J) to represent energy, work and quantity of heat, and newton (N) to represent force.
Traditionally, metric conversion charts and tables would have been used to convert between different units in the metric system. For example, a table for length and area measurements may show the formulae for how to convert from square kilometres to square metres, or from square metres to square millimetres. Similarly, conversion tables or formulae might be used to convert from imperial units to metric units. More recently, the advent of the internet has ushered in a host of on-line calculators that allow instant and highly accurate conversions once the value to be converted is inputted.
[edit] Related articles on Designing Buildings
Featured articles and news
From studies, to books to a new project, with founder Emma Walshaw.
Types of drawings for building design
Still one of the most popular articles the A-Z of drawings.
Who, or What Does the Building Safety Act Apply To?
From compliance to competence in brief.
The remarkable story of a Highland architect.
Commissioning Responsibilities Framework BG 88/2025
BSRIA guidance on establishing clear roles and responsibilities for commissioning tasks.
An architectural movement to love or hate.
Don’t take British stone for granted
It won’t survive on supplying the heritage sector alone.
The Constructing Excellence Value Toolkit
Driving value-based decision making in construction.
Meet CIOB event in Northern Ireland
Inspiring the next generation of construction talent.
Reasons for using MVHR systems
6 reasons for a whole-house approach to ventilation.
Supplementary Planning Documents, a reminder
As used by the City of London to introduce a Retrofit first policy.
The what, how, why and when of deposit return schemes
Circular economy steps for plastic bottles and cans in England and Northern Ireland draws.
Join forces and share Building Safety knowledge in 2025
Why and how to contribute to the Building Safety Wiki.
Reporting on Payment Practices and Performance Regs
Approved amendment coming into effect 1 March 2025.
A new CIOB TIS on discharging CDM 2015 duties
Practical steps that can be undertaken in the Management of Contractors to discharge the relevant CDM 2015 duties.
Planning for homes by transport hubs
Next steps for infrastructure following the updated NPPF.