Cubic metre
A cubic metre (often abbreviated m3 or metre3) is the metric system’s measurement of volume, whether of solid, liquid or gas. It forms part of the SI Unit’s (Systeme International d’Unites) measurement system and can be thought of as a solid cube having 1m-long sides, thereby giving a volume of 1m3. A cubic metre is therefore based on the metre, which is the basic unit of length adopted by the SI system.
Following the French revolution (1789), a new system of measurement was sought to replace the ancient method. The metre was a new unit of length that was defined as one ten-millionth of the distance from the North Pole to the Equator. As this proved impractical, various definitions were introduced until in 1983 the current definition was formulated as "the length of the path travelled by light in a vacuum in 1/299,792,458th of a second".
The usual spelling is ‘metre’ although ‘meter’ is used in the US. (In the UK, a ‘meter’ is a measuring device for speed/distance, gas, electricity, etc).
A cubic metre of water has 1,000 litres or one million cubic centimetres (cm3) and can equate to 13 domestic baths, 111 toilet flushes and 14 loads of domestic washing. It is also equivalent to 35.3 cubic feet or 1.3 cubic yards in the Imperial system.
A cubic metre of water has a mass of 1000 kg, or one tonne.
Calculating cubic metres in solids can be relatively easy for simple shapes, involving multiplying the length by the breadth by the depth. So, a block of ice that is 3m long, 2m wide and 1m deep will have a volume of 3 x 2 x 1 = 6m3. Things get more difficult when trying to calculate the volume of irregular-shaped objects.
[edit] Basic conversions
To convert cubic metres to cubic feet, multiply the cubic metres number by 35.315
To convert cubic feet to cubic metres, divide the cubic feet number by 35.315
So, 10,000ft3 =283.17m3.
[edit] Cubic metre vs metre cubed
A cubic metre and a metre cubed are the same volume, ie 1m³ in any shape. However a meter cube (without the d) can only be a cube shape, and a two meter cube (without the d) would be 8m³, ie 2m x 2m x 2m = 8.
[edit] Related articles on Designing Buildings
Featured articles and news
How orchards can influence planning and development.
A practical guide to the use of flint in design and architecture.
Designing for neurodiversity: driving change for the better
Accessible inclusive design translated into reality.
RIBA detailed response to Grenfell Inquiry Phase 2 report
Briefing notes following its initial 4 September response.
Approved Document B: Fire Safety from March
Current and future changes with historical documentation.
A New Year, a new look for BSRIA
As phase 1 of the BSRIA Living Laboratory is completed.
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from construction and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.