Impellor
An impellor (also spelt impeller) is a bladed rotor, most often used to describe an apparatus used to increase pressure and flow of fluids. It is also the term used to describe the central bladed component of a fan which is used to increase pressure and flow of air. In general there are axial impellors, which increase flow on the same axis as the incoming flow feed and centrifugal impellors, which increase flow at an angle to the incoming flow (normally 45 degrees).
Impellors are a key component of any pump system and can have a variety of designs, they are the opposite of a turbine which extracts energy from a flowing fluid or gas and this reduces its pressure in the process. Types of impellors found in pump systems might include; open, semi-open, closed, vortex and cutter impellors.
[edit] Related articles on Designing Buildings
- Air conditioning.
- Air handling unit.
- Building management systems.
- Building services
- Building services engineer.
- Chilled water fan coil system vs refrigerant based system
- Constant air volume CAV
- Evaluation of cooling effects: outdoor watermist fan
- Fan.
- Fan coil refurbishment for improved operational efficiency
- Fan coil unit
- Fan coils
- Fan convector
- Fan heater
- How do I know what capacity fan coil I need?
- How does a chilled water fan coil unit work?
- HVAC
- Intermittent extract fan
- Types of pump.
- Types of fan.
- Variable air volume VAV
- Ventilation
- What are the different types of fan coil units?
Featured articles and news
HSE simplified advice for installers of stone worktops
After company fined for repeatedly failing to protect workers.
Co-located with 10th year of UK Construction Week.
How orchards can influence planning and development.
Time for knapping, no time for napping
Decorative split stone square patterns in facades.
A practical guide to the use of flint in design and architecture.
Designing for neurodiversity: driving change for the better
Accessible inclusive design translated into reality.
RIBA detailed response to Grenfell Inquiry Phase 2 report
Briefing notes following its initial 4 September response.
Approved Document B: Fire Safety from March
Current and future changes with historical documentation.
A New Year, a new look for BSRIA
As phase 1 of the BSRIA Living Laboratory is completed.
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from construction and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.