Cold roof
A cold roof is roof in which the thermal insulation layer is located immediately above or between the ceiling joists meaning that everything above the insulation, such as the rafters, and any roof space, will be colder than the living space below it.
When warm, damp air permeates up through the ceiling and reaches the cold roof space, the change in temperature can result in condensation forming. Adequate roof space ventilation must be provided therefore to remove this air. This requirement, and the need for preventative measures to tackle cold bridging, means that warm roofs can be preferable.
A warm roof is one in which the insulation layer is laid on top of roof structure (or above the loft or attic space in the case of pitched roofs) so that the roof structure or roof space is closer to the inside temperature and so the risk of condensation is reduced.
Particular care must be taken when installing loft insulation, as this can convert a pitched roof from a warm to a cold roof. Ventilation must then be provided to prevent the accumulation of moist air and so condensation, as this can cause the roof structure to deteriorate and ultimately to fail.
[edit] Related articles on Designing Buildings
Featured articles and news
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Heat pumps, vehicle chargers and heating appliances must be sold with smart functionality.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
New-style degrees set for reformed ARB accreditation
Following the ARB Tomorrow's Architects competency outcomes for Architects.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.
Preserving, waterproofing and decorating buildings.
Many resources for visitors aswell as new features for members.
Using technology to empower communities
The Community data platform; capturing the DNA of a place and fostering participation, for better design.
Heat pump and wind turbine sound calculations for PDRs
MCS publish updated sound calculation standards for permitted development installations.
Homes England creates largest housing-led site in the North
Successful, 34 hectare land acquisition with the residential allocation now completed.
Scottish apprenticeship training proposals
General support although better accountability and transparency is sought.
The history of building regulations
A story of belated action in response to crisis.
Moisture, fire safety and emerging trends in living walls
How wet is your wall?
Current policy explained and newly published consultation by the UK and Welsh Governments.
British architecture 1919–39. Book review.
Conservation of listed prefabs in Moseley.
Energy industry calls for urgent reform.