Carbide meter
When identifying damp in buildings, architects, surveyors etc may use moisture meters to confirm or obtain a diagnosis. In skilled hands with regular site calibration, moisture meters can be a good starting point.
Carbide meters are one method of measuring moisture content. This technique (sometimes referred to as Speedy Carbide Test after the manufacturer’s name) works by testing a weighed sample of drilled mansory that has been taken from a sample area such as a mortar joint located above the damp proof course. This sample is then placed in a container. A measured amount of calcium carbide powder is placed in a separate portion of the container, and then the container is sealed. The container is shaken and the two substances mix together to trigger a reaction that produces acetylene gas if moisture is present.
The meter will indicate the results of the test. Readings will range from 0 to 5, with a higher number indicating a higher level of moisture.
Carbide meters are likely to give a more accurate measure of moisture content than some other techniques, although they require the removal of a sample - which could be considered by some as destructive. As a result, this method of testing may only be advisable after an electronic meter, or some other method has indicated the presence of moisture.
For more information see: Assessing moisture in porous building materials.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Heat pumps, vehicle chargers and heating appliances must be sold with smart functionality.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
New-style degrees set for reformed ARB accreditation
Following the ARB Tomorrow's Architects competency outcomes for Architects.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.
Preserving, waterproofing and decorating buildings.
Many resources for visitors aswell as new features for members.
Using technology to empower communities
The Community data platform; capturing the DNA of a place and fostering participation, for better design.
Heat pump and wind turbine sound calculations for PDRs
MCS publish updated sound calculation standards for permitted development installations.
Homes England creates largest housing-led site in the North
Successful, 34 hectare land acquisition with the residential allocation now completed.
Scottish apprenticeship training proposals
General support although better accountability and transparency is sought.
The history of building regulations
A story of belated action in response to crisis.
Moisture, fire safety and emerging trends in living walls
How wet is your wall?
Current policy explained and newly published consultation by the UK and Welsh Governments.
British architecture 1919–39. Book review.
Conservation of listed prefabs in Moseley.
Energy industry calls for urgent reform.