Ripple figure in timber
BRE (Building Research Establishment) is an independent, research-based consultancy, testing and training organisation, operating in the built environment and associated industries. A guide to the use of urban timber (FB 50) was written by Geoff Cooper and published by BRE on 31 July 2012.
The guide suggests that ripple figure, or fiddle-back figure is:
| ...a series of closely grouped horizontal bands most often seen on the radial cut surface of sycamore, Acer pseudoplatanus. This figure is an optical effect caused by variations in the alignment of wood fibres. It is the result of the axial elements of the tree undulating through the stem giving a transverse barred effect on the radial cut face. |
[edit] Related articles on Designing Buildings Wiki
- 11 things you didn't know about wood.
- A guide to the use of urban timber (FB 50).
- Birds-eye figure.
- BRE articles on Designing Buildings Wiki.
- Building Research Establishment.
- Burr.
- Carpentry.
- Cat's paw figure
- Physical Properties of Wood.
- The differences between hardwood and softwood.
- Timber vs wood.
- Timber.
- Types of timber.
Featured articles and news
The history of building regulations
A story of belated action in response to crisis.
Moisture, fire safety and emerging trends in living walls
How wet is your wall?
Current policy explained and newly published consultation by the UK and Welsh Governments.
British architecture 1919–39. Book review.
Conservation of listed prefabs in Moseley.
Energy industry calls for urgent reform.
Heritage staff wellbeing at work survey.
A five minute introduction.
50th Golden anniversary ECA Edmundson apprentice award
Showcasing the very best electrotechnical and engineering services for half a century.
Welsh government consults on HRBs and reg changes
Seeking feedback on a new regulatory regime and a broad range of issues.
CIOB Client Guide (2nd edition) March 2025
Free download covering statutory dutyholder roles under the Building Safety Act and much more.
AI and automation in 3D modelling and spatial design
Can almost half of design development tasks be automated?
Minister quizzed, as responsibility transfers to MHCLG and BSR publishes new building control guidance.
UK environmental regulations reform 2025
Amid wider new approaches to ensure regulators and regulation support growth.
The maintenance challenge of tenements.
BSRIA Statutory Compliance Inspection Checklist
BG80/2025 now significantly updated to include requirements related to important changes in legislation.