Post lift
A post lift is a lifting device which is typically used to raise vehicles inside buildings for easy repair and maintenance access. Most post lifts are above ground, but there are also in-ground varieties.
Contents |
[edit] Two post lift
This is the most commonly-used type of post lift. It consists of two upright columns, four adjustable arms attached to a carriage assembly, and two hydraulic cylinders. It is usually mounted to an existing concrete structure, at least 4 inches thick. Most are powered by an electric/hydraulic power unit.
The power unit delivers pressurised hydraulic fluid to the cylinders. A set of equalisation cables is installed between the carriages to ensure that all four arms move together. Automatic safety arm locks are designed to secure the lift arms, once the arm pads have been properly positioned under the vehicle.
[edit] Four post lift
This type of lift allows the vehicle to be driven onto two runways and lifted by its tyres. The advantage of this lift is that their is full access to the underside of the vehicle.
[edit] Drive-on parallelogram
This is a drive-on lift with two runways. The lifting mechanism can move the vehicle a short distance when lifting or lowering; or it can simply be lifted straight up and down. The two parallel runways are usually synchronised by hydraulic or electronic means; sometimes with a torsion bar connected to opposing legs.
[edit] Scissors
Surface-mounted and in-ground scissor lifts are available; either as a drive-on with runways or frame/body-engaging. It is similar to a parallelogram lift but raises and lowers the vehicle in a straight vertical path.
[edit] In-ground lift
This type of lift has its assembly installed below the concrete floor. One or more hydraulic pistons or scissors mechanisms can be used depending on the weight to be lifted.
[edit] Wheel engaging mobile units
Also known as a mobile column lift, this consists of individual lifting columns used in sets of 2, 4, 6, or more units. Each individual column is mobile and contains an electric power unit. Cables or wireless technology is used to synchronise the column lifting and lowering.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Heat pumps, vehicle chargers and heating appliances must be sold with smart functionality.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
New-style degrees set for reformed ARB accreditation
Following the ARB Tomorrow's Architects competency outcomes for Architects.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.