Phenolic foam insulation
Guide to energy retrofit of traditional buildings, published by Historic Environment Scotland in November 2021, defines phenolic foam as: ‘A synthetic polymer made from thermosetting foam plastic and used in thermal insulation’
Phenolic foam is considered one of the best material for thermal insulation.
- It has over 90% closed cell formation, giving it good stability.
- Phenolic foams come in varying densities in the range of 35 kg/m³ to 200 kg/m³. High density varieties such as insulation boards have good strength and are suitable for floor insulation.
- It has low thermal conductivity. The thermal conductivity of phenolic closed cell insulation material is generally between 0.018 W/m.K and 0.023 W/m.K.
- It has fire retardant properties and a low smoke level (even under pyrolysis).
- It is water resistant.
- It is lightweight and so is easy to transport and install.
- Closed cell phenolic insulation foam can resist almost all inorganic acidic erosion, organic solvents and acids. However, it under-performs in alkaline environments.
- When exposed to sunlight for long periods it does not show any noticeable ageing.
- Insulation boards show good sound absorption properties.
The most common blowing agent used in phenolic foam insulation is ‘Pentane’. This is used to comply with EC regulation, because it is CFC and HCFC free, has no ozone depletion potential and low global warming potential. Pentane is a hydrocarbon. In order to prevent the blowing agent escaping and being replaced by air, the insulation boards are covered with gas tight aluminium foil or glass tissue.
Illustrated Guide to Mechanical Building Services 3rd Edition (BG 31/2017), written by David Bleicher and published by BSRIA in May 2017, suggests that phenolic foam is: ‘A solid foam insulation with good thermal performance that can be used on most systems. As with mineral wool insulation, if used on cold water, chilled water or refrigeration pipework, it must be vapour sealed to reduce the risk of condensation forming on the pipe surface.’
[edit] Related articles on Designing Buildings
- Aerogel insulation for buildings.
- Cavity wall insulation.
- Conduction.
- Fire retardant.
- Heat transfer.
- Interstitial condensation.
- Phase change materials.
- Polyurethane spray foam in structurally insulated panels and composite structures.
- Solid wall insulation.
- Sound insulation.
- Thermal bridge.
- Thermal comfort.
- Transparent insulation.
- U-value.
Featured articles and news
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Heat pumps, vehicle chargers and heating appliances must be sold with smart functionality.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
New-style degrees set for reformed ARB accreditation
Following the ARB Tomorrow's Architects competency outcomes for Architects.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.
Preserving, waterproofing and decorating buildings.
Many resources for visitors aswell as new features for members.
Using technology to empower communities
The Community data platform; capturing the DNA of a place and fostering participation, for better design.
Heat pump and wind turbine sound calculations for PDRs
MCS publish updated sound calculation standards for permitted development installations.
Homes England creates largest housing-led site in the North
Successful, 34 hectare land acquisition with the residential allocation now completed.
Scottish apprenticeship training proposals
General support although better accountability and transparency is sought.
The history of building regulations
A story of belated action in response to crisis.
Moisture, fire safety and emerging trends in living walls
How wet is your wall?
Current policy explained and newly published consultation by the UK and Welsh Governments.
British architecture 1919–39. Book review.
Conservation of listed prefabs in Moseley.
Energy industry calls for urgent reform.