Electric lock
An electric lock makes use of an electric current to operate a mechanism to either hold shut or release a securing system.
Very often they are encountered in or around buildings as part of access control systems.
Electric locks may be split into two basic groups: those where the physical securing is achieved by use of a magnetic holding force, and those where an electric current is used to physically move a bolt or latch, usually via a magnetic solenoid or motor action.
Magnetic locks or ‘maglocks’ are the most common type used in access control systems. They work on the principle that when an electric current is applied to an electromagnet, its magnetising force attracts and holds firmly a magnetic material such as iron or steel, and when the electric current is stopped, the magnetic force ceases.
The usual arrangement for a maglock on a door or gate consists of a large electromagnet which is fixed to the door or gate frame, and an accompanying steel plate, or armature, which is secured to the door or gate itself.
When powered, the door or gate is held securely to the electromagnet, effectively preventing it from being opened – even with force.
Another form of electric lock is where a solenoid mechanically operates a bolt into its keep, or directly operates the keep itself. The keep is the part of the lock on the door frame that the bolt engages with.
A solenoid is itself a simple electromagnet that converts electrical current into mechanical movement.
Controls such as an access control system can energise and de-energise electric locks. Such controls may often be activated via PIN code readers, proximity sensors or fobs, key code pads or remotely via manual switching in a secured area of the building.
Often, such access control systems need very careful design considerations with regards to how the control is handled during an emergency, when the door or gate might be needed for safety or escape. In some instances, designers may elelct to link such access control systems to the building’s safety systems such as fire alarms.
In all cases with electric locking systems it is essential to weigh up the need for absolute security on one hand, against safety egress and building evacuation logistics on the other.
It should also be noted that with any locking system, overall security will always be governed and limited by the strength of the door or gate and the frame into which it is secured.
--ECA
[edit] Related articles on Designing Buildings
- Access control.
- CCTV.
- Commercial security systems.
- Digital door lock market.
- ECA articles.
- Electric motor.
- Electrical energy.
- Electrical power.
- Entry control.
- Home security solutions market.
- How door locks work.
- Outbuildings security.
- Perimeter security.
- Proximity access control system.
- Security and the built environment.
- Security glazing.
- Types of alarm.
- Types of door.
- Types of lock.
- Visitor door entry system.
Featured articles and news
Listed despite problems with its design.
Zen and the art of cycling exploration.
Design Council Homes Taskforce launched
To support government 1.5 million homes target within UK climate commitments.
The story of this knowledge quarter building.
In ecology, in hydrology, in biology and in architecture.
Creating environments that promote physical, mental, and social well-being.
UK cases of neutral current diversion
Research project looks for example contributions.
Overstocking and macro-economics cause a decline.
The 2024 update of the Common Assessment Standard
Demonstrating organisational capability’ to fulfil roles under the Building Safety Act.
56 recommendations for a better built environment
Published by the CIC ahead of the King’s Speech.
SkillELECTRIC Top 8 Competitors Named
in annual search for the UK’s best student electrician.
CIOB Diversity and Inclusion technical information sheet
Step-by-step guide on implementing D and I practices.
Conservation and the Indian City. Book review.
Reversibility in conservation ethics
Learning from painting conservation.
Where It's AT Podcast launched!
New CIAT Architectural Technology Podcast goes live.