Attestation in construction
Attestation is the process of confirming that something is correct or genuine, or that a particular requirement has been met. Attestation can be a process of signature, oath or some other form of certification. It is typically associated with wills, where witnesses attest the execution of a will.
In construction, the part of construction contracts that requires signature can be referred to as the ‘attestation clause’. In addition, if a contract is executed under seal, signatures may be added to ‘attest’ the seal.
Attestation can also be used to indicate accreditation of some sort, for example under the Construction Skills Certification Scheme (CSCS).
More recently, the introduction of the Construction Products Regulation (CPR) in 2011 has given a specific new meaning to attestation in construction. The regulation was introduced to harmonise performance information on construction products across the European Economic Area (EEA). It is made most visible by the mandatory CE marking of regulated products. Demonstrating compliance with the regulations requires ‘attestation of conformity’ (AoC). There are five levels of attestation of conformity depending on the nature of the product. The lowest levels (1 or 1+) have the most demanding requirements and might be necessary for products with safety-critical aspects. The highest level (4) is the least demanding and might for example apply to decorative products. Non-safety critical attestation might be carried out by the manufacturer themselves, whilst safety critical testing might have to be undertaken by a notified body.
[edit] Related articles on Designing Buildings Wiki
- Articles of agreement.
- Attestation of conformity.
- CE marking.
- Construction Products Regulations.
- Construction Skills Certification Scheme.
- Construction contracts.
- Contracts under seal v under hand.
- Kitemark.
- Named specialist work.
[edit] External references
Featured articles and news
HSE simplified advice for installers of stone worktops
After company fined for repeatedly failing to protect workers.
Co-located with 10th year of UK Construction Week.
How orchards can influence planning and development.
Time for knapping, no time for napping
Decorative split stone square patterns in facades.
A practical guide to the use of flint in design and architecture.
Designing for neurodiversity: driving change for the better
Accessible inclusive design translated into reality.
RIBA detailed response to Grenfell Inquiry Phase 2 report
Briefing notes following its initial 4 September response.
Approved Document B: Fire Safety from March
Current and future changes with historical documentation.
A New Year, a new look for BSRIA
As phase 1 of the BSRIA Living Laboratory is completed.
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from construction and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.
Comments
Get Gold CSCS Card for Skilled Worker and Supervisor by filling online application form. Apply today for CSCS Gold Cards with Construction Helpline.