Wheel washing system
Wheel washing systems can be installed on construction sites to enable the wheels of plant, trucks and other vehicles to be cleaned before leaving the site. This is used to control and eliminate mud, slurry and other pollutants being deposited on public roads.
A requirement for wheel washing may be identified as part of an environmental risk assessment carried out prior to work beginning on site. It can also be particularly important on sites that contain land that is contaminated, and may be a requirement of planning permissions.
The system is typically located near to the site exit and instructions given to site operatives, delivery drivers and visitors that they are to use it before leaving.
There are two main types of wheel washing system:
- Roller: Each set of wheels is placed on the rollers and rotated as water sprays out from strategically-placed nozzles.
- Drive-through: The vehicle drives through and a sensor triggers the washing process.
The sludge which is washed off may be directed into a recycling tank, with the sedimentation of the solids accelerated by the use of flocculants. The solids which settle at the bottom of the tank are removed by an automatic scraper or excavating plant. The aim is for clean water to be used for every wash.
There are also 'environmentally-friendly' systems available which are stand-alone units involving water filtration and recirculation.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Twas the site before Christmas...
A rhyme for the industry and a thankyou to our supporters.
Plumbing and heating systems in schools
New apprentice pay rates coming into effect in the new year
Addressing the impact of recent national minimum wage changes.
EBSSA support for the new industry competence structure
The Engineering and Building Services Skills Authority, in working group 2.
Notes from BSRIA Sustainable Futures briefing
From carbon down to the all important customer: Redefining Retrofit for Net Zero Living.
Principal Designer: A New Opportunity for Architects
ACA launches a Principal Designer Register for architects.
A new government plan for housing and nature recovery
Exploring a new housing and infrastructure nature recovery framework.
Leveraging technology to enhance prospects for students
A case study on the significance of the Autodesk Revit certification.
Fundamental Review of Building Regulations Guidance
Announced during commons debate on the Grenfell Inquiry Phase 2 report.
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.
CIOB photographic competition final images revealed
Art of Building produces stunning images for another year.
HSE prosecutes company for putting workers at risk
Roofing company fined and its director sentenced.
Strategic restructure to transform industry competence
EBSSA becomes part of a new industry competence structure.
Major overhaul of planning committees proposed by government
Planning decisions set to be fast-tracked to tackle the housing crisis.
Industry Competence Steering Group restructure
ICSG transitions to the Industry Competence Committee (ICC) under the Building Safety Regulator (BSR).
Principal Contractor Competency Certification Scheme
CIOB PCCCS competence framework for Principal Contractors.
The CIAT Principal Designer register
Issues explained via a series of FAQs.