Portable Appliance Testing (PAT)
Contents |
[edit] Introduction
In the UK, portable appliance testing (PAT) is a process that ensures electrical appliances are safe for use. An electric appliance can be taken as meaning any electrically-powered household appliance as well as appliances used in commercial and industrial applications e.g construction sites.
[edit] What testing is required?
Testing requires an examination of the appliance. In most cases, visual checks may suffice to reveal any defects. However, some appliances will require proper testing by qualified personnel. It is important to note that for some defects visual examination is essential as faults may not be detected by testing alone.
Using a checklist that forms part of a periodic electrical maintenance regime, trained users may find it useful to carry out a brief examination of the appliance, depending on the type of equipment and the environment in which it is used. However, it may be necessary to revert to a competent person for more formal visual inspection and testing.
Portable Appliance Testing is covered by the Electricity at Work Regulations 1989 which require that electrical appliances that have the capacity to cause injury should be maintained in a safe condition. However, the regulations do not specify what requires to be done, how frequently it should be undertaken and by whom. In other words, there is no legal requirement to inspect or test electrical equipment. Despite this, responsible employers usually have items such as desk lamps, desk-top power sockets, coffee machines and kettles tested on an annual basis. The items are usually labelled with the date testing was last carried which acts both as a management record and also demonstrates to staff that testing has indeed been carried out.
[edit] Frequency of testing
This will depend on the type of appliance and its use. A drill used on a daily basis on a construction site is likely to require more frequent testing than a low-power consumption domestic floor lamp.
[edit] Who does the testing?
For simple appliances in low-risk environments that require only a visual inspection, all that is required is competency; this may be undertaken by a staff member if they have the knowledge and training. For more complex equipment and applications requiring both visual and electrical testing, a better qualified person such as an electrician will be required.
It should be remembered that PAT is not compulsory. However, employers must ensure their equipment is in a good state of repair to avoid causing injury.
[edit] Related articles on Designing Buildings Wiki
- Articles by the Electrical Contractors' Association (ECA).
- Developing system intelligence for optimising building electricity networks.
- Electric vehicles.
- Electricity supply.
- Energy storage.
- Flexible electrical networks for a low carbon future.
- Kilowatt hour.
- Micro-grids.
- Power factor.
- Subsidy-free low carbon electricity.
- The Future of Electricity in Domestic Buildings.
- The use of batteries to store electricity for buildings.
[edit] External references
Featured articles and news
BSRIA Briefing 2024: Sustainable Futures speakers
Redefining Retrofit for Net Zero Living 22 Nov.
Wall of support for post-Grenfell regulation of electricians
Call for a shake-up of the construction industry highlighted on radio.
Digital sustainability through future AEC tools
Bringing together industry and academia to meet challenges.
Skills gap for net zero highlighted to Minister for Industry
ECA convenes roundtable discussion at Portcullis House.
Evidencing Net Zero with the new UK buildings standard
Pilot version with detailed excel proforma out now!
Scottish Building Safety Levy, in consultation
From direct remediation and the RPDT, to the costs and alternatives.
Waves of warmer homes grants for the rental sector
Boosting energy efficiency standards for all rented homes.
A refocus of the National Planning Policy Framework
Key terms described in brief, as the consultation closes the evening of the 24th.
Fortified farmhouses of the unruly 16th-and 17th-century borders.
ECA shares advice for those who may be exposed to risks.
How to revolutionise UK housing with MMC
CIC and Supply Chain Sustainability School unveil a plan.
From the UKs largest manufacturer and supplier of lime.
From mud bricks to smart concrete
A brief history from 7000BC to a future on the moon.
Regulator of Social Housing publishes latest fire safety report
Covering remediation of 11 metre plus social housing sector buildings.
Apartment and Duplex Defects Remediation Bill 2024
Approved for priority drafting by Government of Ireland.
The long list with in the frame of key historical events.
Competence frameworks for sustainability in the built environment
Code of practice, core criteria consultation draft for comment.
New Floods Resilience Taskforce
With a wet met office autumn prediction.