2013 changes to the approved documents for part L of the building regulations
Contents |
[edit] Introduction
Changes to the approved documents for Part L of the building regulations came into effect on 6 April 2014 when the 2013 editions of approved documents L1A and L2A came into force, and 2013 amendments to the 2010 editions of approved documents L1B and L2B came into force.
Under transitional arrangements, the previous approved documents continue to apply where work commenced before 6th April 2014, or where a building regulations application was made before 6 April 2014, as long as the work commences before 6th April 2015.
[edit] Approved Document L1A: Conservation of fuel and power in new dwellings, 2013 edition
The main changes approved document L1A are that:
- A new requirement, regulation 26A, has been introduced that requires new dwellings to achieve or better a fabric energy efficiency target in addition to the carbon dioxide target.
- The notional dwelling used to determine carbon dioxide and fabric energy efficiency targets is the same size and shape as the actual dwelling, constructed to a concurrent specification. The Part L 2013 specifications have been strengthened to deliver 6 per cent carbon dioxide savings across the new homes build mix relative to Part L 2010.
- A summary of the Part L 2013 notional dwelling is published at Table 4 in the approved document with the full detail in SAP 2012 Appendix R. If the actual dwelling is constructed entirely to the notional dwelling specifications it will meet the carbon dioxide and fabric energy efficiency targets and the limiting values for individual fabric elements and buildings services. Developers are, however, free to vary the specification, provided the same overall level of carbon dioxide emissions and fabric energy efficiency performance is achieved or bettered.
- The document consolidates the amendments made in December 2012 requiring the feasibility of high-efficiency alternative systems to be taken into account before construction commences.
- The guidance for insulation of circulation pipes within communal spaces is given greater prominence.
[edit] Approved Document L2A: Conservation of fuel and power in new buildings other than dwellings, 2013 Edition.
The main changes in approved document L2A are that:
- The notional building used to determine carbon dioxide targets is the same size and shape as the actual building, constructed to a concurrent specification. The Part L 2013 specifications have been strengthened to deliver 9 per cent carbon dioxide savings across the new non-domestic building mix relative to Part L 2010.
- A wider set of notional buildings has now been defined for top-lit, side-lit (heated only) and side-lit (heated and cooled) buildings. The notional building air permeability has been further subdivided by size.
- A summary of the Part L 2013 notional buildings is published at Table 5 in the approved document with the full detail in the National Calculation Methodology (NCM) modelling guide.
- If the actual building is constructed entirely to the notional building specifications it will meet the carbon dioxide targets and the limiting fabric and buildings services parameters. Developers are, however, free to vary the specification, provided the same overall level of carbon dioxide emissions is achieved or bettered.
- The document consolidates the amendments made in December 2012 requiring the feasibility of high-efficiency alternative systems to be taken into account before construction commences.
[edit] Approved documents L1B and L2B
- Approved Document L1B: Conservation of fuel and power in existing dwellings.
- Approved Document L2B: Conservation of fuel and power in existing buildings other than dwellings.
Both remain at their 2010 edition. However some amendments were made to those 2010 editions: Amendments to Approved Documents L1B and L2B 2010 editions.
- There is a strengthening of energy efficiency standards for specified non-domestic building services (i.e. when replacing chillers, fan coil units and lighting) and the introduction of an alternative route of compliance for lighting installations, the Lighting Energy Numerical Indicator (LENI). This is set out in the 2013 edition of the Non Domestic Building Services Compliance Guide.
- There is no strengthening in Part L 2013 of the energy efficiency standards for extensions or replacement windows and doors to existing homes or existing non-domestic buildings.
- The department has however published amendments to Approved Document L1B and Approved Document L2B (2010 editions). These amendments make reference to updated British and European Standards and third party guidance. These include new references to third party guidance on Window Energy Ratings and the introduction of Door Set Energy Ratings as an alternative route of compliance and on establishing U-values based on the developed area of the roof-lights.
- These amendments are in addition to and to be read in conjunction with those made to Approved Document L1B and Approved Document L2B earlier in 2013 to take account of the requirements for major renovation in the recast European Energy Performance of Buildings Directive and the introduction of a new Approved Document 7 providing guidance on materials and workmanship.
[edit] Related articles on Designing Buildings
- Approved documents.
- Approved inspector.
- Building control bodies.
- Building Regulations.
- Door energy ratings.
- Dwelling fabric energy efficiency rate.
- Energy certificates.
- Lighting energy numeric indicator.
- Limiting fabric parameters.
- National Calculation Methodology.
- Part L.
- The Building Act.
- Target fabric energy efficiency rate.
- U-values.
- Window energy ratings.
Featured articles and news
BSRIA Briefing 2024: Sustainable Futures speakers
Redefining Retrofit for Net Zero Living 22 Nov.
Wall of support for post-Grenfell regulation of electricians
Call for a shake-up of the construction industry highlighted on radio.
Digital sustainability through future AEC tools
Bringing together industry and academia to meet challenges.
Skills gap for net zero highlighted to Minister for Industry
ECA convenes roundtable discussion at Portcullis House.
Evidencing Net Zero with the new UK buildings standard
Pilot version with detailed excel proforma out now!
Scottish Building Safety Levy, in consultation
From direct remediation and the RPDT, to the costs and alternatives.
Waves of warmer homes grants for the rental sector
Boosting energy efficiency standards for all rented homes.
A refocus of the National Planning Policy Framework
Key terms described in brief, as the consultation closes the evening of the 24th.
Fortified farmhouses of the unruly 16th-and 17th-century borders.
ECA shares advice for those who may be exposed to risks.
How to revolutionise UK housing with MMC
CIC and Supply Chain Sustainability School unveil a plan.
From the UKs largest manufacturer and supplier of lime.
From mud bricks to smart concrete
A brief history from 7000BC to a future on the moon.
Regulator of Social Housing publishes latest fire safety report
Covering remediation of 11 metre plus social housing sector buildings.
Apartment and Duplex Defects Remediation Bill 2024
Approved for priority drafting by Government of Ireland.
The long list with in the frame of key historical events.
Competence frameworks for sustainability in the built environment
Code of practice, core criteria consultation draft for comment.
New Floods Resilience Taskforce
With a wet met office autumn prediction.