Iron ore tailings IOTs
|
A loader works with the iron ore tailings from the Sishen mine expansion project. (Photo attribution: Graeme Williams, Media Club South Africa.) |
Iron ore tailings (IOTs) are a form of solid waste produced during the mining process. IOTs are created through the extraction of the valuable portion of the iron ore from the waste portion. This waste material is sometimes produced in the form of a type of slurry.
IOTs have no commercial value and are typically stored in tailings dams that also contain water and other waste that is produced as a result of the mining process.
IOTs stored in tailing dams may be dangerous due to high levels of chemicals (such as iron oxide) that are thought to be harmful to the environment. IOTs that are not controlled or contained are sometimes carried by wind and water to contaminate other areas.
High volumes of IOTs may create environmental, economic and ecological concerns due to the amount of land occupied and the safety hazards they can produce.
Researchers have been exploring different recycling methods to convert IOTs into useful products that are not environmentally harmful. Some of these products include:
- Bricks.
- Ceramic tiles.
- Concrete aggregates.
- Epoxy and engineered cementitious composites.
- Polypropylene cement.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
HSE simplified advice for installers of stone worktops
After company fined for repeatedly failing to protect workers.
Co-located with 10th year of UK Construction Week.
How orchards can influence planning and development.
Time for knapping, no time for napping
Decorative split stone square patterns in facades.
A practical guide to the use of flint in design and architecture.
Designing for neurodiversity: driving change for the better
Accessible inclusive design translated into reality.
RIBA detailed response to Grenfell Inquiry Phase 2 report
Briefing notes following its initial 4 September response.
Approved Document B: Fire Safety from March
Current and future changes with historical documentation.
A New Year, a new look for BSRIA
As phase 1 of the BSRIA Living Laboratory is completed.
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from construction and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.