Intumescent ablators
Ablative materials in design and construction, are materials that are generally resistant to high temperatures in one of three ways and used for thermal protection. Intumescent ablators, swell as a result of heat exposure.
The swelling of intumescent ablators, as a result of heat exposure, leads to an increase in the volume and decrease in density of the material. Intumescent materials are often a core component of passive fire protection, because they can seal penetrations, gaps and edges in walls, floors and ceilings that might otherwise fire resistant.
Intumescent seals, often called intumescence strips can be made from a variety of synthetic polymers and resin binders such as silicone or epoxy.
Two other types of related ablative materials are charring ablators and subliming ablators.
[edit] Related articles on Designing Buildings
Featured articles and news
HE expands finance alliance to boost SME house building
Project follows on from Habiko public-private place making pension partnership for affordable housing delivery.
Licensing construction; looking back to look forward
Voluntary to required contractors (licensing) schemes.
A contractor discusses the Building Safety Act
A brief to the point look at changes that have occurred.
How orchards can influence planning and development.
CIOB Construction Manager of the Year award
Shortlist set to go head-to-head for prestigious industry title.
HSE simplified advice for installers of stone worktops
After company fined for repeatedly failing to protect workers.
Co-located with 10th year of UK Construction Week.
Time for knapping, no time for napping
Decorative split stone square patterns in facades.
A practical guide to the use of flint in design and architecture.
Designing for neurodiversity: driving change for the better
Accessible inclusive design translated into reality.
RIBA detailed response to Grenfell Inquiry Phase 2 report
Briefing notes following its initial 4 September response.
Approved Document B: Fire Safety from March
Current and future changes with historical documentation.
A New Year, a new look for BSRIA
As phase 1 of the BSRIA Living Laboratory is completed.
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from construction and 50 percent recorded as fall from height.
Comments
[edit] o make a comment about this article, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.