Blockboard
Contents |
[edit] Introduction
Blockboard is a timber-based sheet material that comprises a core, faced on both sides. The core is made from parallel, rectangular-section, bonded softwood strips (around 28mm wide); these are sandwiched between a variety of facing materials which can include veneers of softwood, hardwood, thin MDF or particle board. The assembly is glued under high pressure.
The construction can be three-layer – with a single facing on each side of the core, e.g MDF or particleboard, or it can be five-layer for better stability – with two facings on each side. The grain of the facing material is usually arranged so that it is perpendicular to that of the core strips – which for reasons of strength run along the length of the board and are usually made from seasoned, lightweight timbers, such as poplar or spruce. Their moisture content is usually 12% or less.
Blockboard can also be referred to as battenboard, coreboard or lumber core (US). Laminboard is a similar product but generally with thinner strips of core timber.
[edit] Uses
Like chipboard, blockboard is used mainly for interior uses due to the nature of the adhesives used. But in contrast to chipboard, blockboard has great structural stability and strength and is suited to applications such as doors, shelves, tables, panelling, partitions or kitchen worktops which have no intermediate supports.
Blockboard also forms a good base material for veneering, but the edges will have to be lipped with solid wood. It can also be painted after a light sanding but the edges will still require lipping or alternatively filling and sanding.
Blockboard is commonly available in 2,440mm x 1,220mm sheets (based on the imperial 8ft x 4ft dimensions) and in thicknesses of 18mm and 25mm.
[edit] Working
Blockboard can be worked with standard tools: it is easily sawn and has good screw-holding and nail-holding properties. It can be resistant to warping if both sides have similar treatments. It can also be boiling water-proof and 'eco-friendly'.
[edit] Related articles on Designing Buildings
- Adhesives.
- Cedar.
- Chipboard.
- Confederation of Timber Industries.
- Cross-laminated timber.
- Engineered bamboo.
- Engineered wood products EWP.
- Glulam.
- Laminated veneer lumber LVL.
- Lime wood.
- Medium density fibreboard - MDF
- Modified wood.
- Oriented strand board.
- Plywood.
- Softwood.
- Timber.
- Timber construction for London.
- Timber preservation.
- Timber vs wood.
- Types of timber.
Featured articles and news
Top 50 firms awarded 52bn of projects in the last year
New engineering data shows.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
UK Construction Week, London is here !
Debuting major international pavilions and much more.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.