Plasticiser
Contents |
[edit] Introduction
Plasticisers (admixtures or dispersants) are substances added to materials such as cement mortar mixes (as well as to plaster and concrete) to decrease viscosity and plasticity and increase workability and performance. In the case of mortar, they make the mix more flexible and easier to maintain a more consistent mortar thickness. In turn, this can mean that bricklayers are able to lay more bricks than they otherwise might.
Numerous types of plasticisers are available commercially to enhance workability. They typically work by retarding the mortar from setting and providing air entrainment to assist workability. They can also help prevent mortar shrinkage, which if it occurs, does not only look unsightly in mortar joints but also can allow water ingress. Excessive use of plasticisers can have an adverse effect on the mortar.
Lime added to mortars is well known for giving them a soft, putty-like consistency which can make them easier to work and retard their setting. Air entrainment plasticisers when used in the correct proportions can have a similar effect and are sometimes used to replace lime within the mix.
NB Plasticisers can also be used in plastics. For more information see: Plasticisation.
[edit] Washing-up liquid
Washing up liquid is commonly used as a plasticiser in cement mortar. However, it is thought to affect the long-term structural integrity of the mortar as it can add too much air, thereby creating bubbles. The surfactants in washing up liquid may also produce foam if used in excess. These bubbles may fill with moisture in winter and if freezing occurs could cause pore expansion, cracking and disintegration of the mortar. That said, it is a very common practice in the UK, and is used in training brick laying as it can prevent the mortar from setting so it can be re-worked or re-used.
The use of washing-up liquid is discouraged by many professionals, as well as The Brick Development Association which says: “Washing-up liquids and any additives containing calcium chloride should not be used as they can weaken the mortar and contribute to efflorescence staining.”
[edit] Superplasticisers
Concrete superplasticisers play a vital role in improving the quality and reducing the cost of construction. Superplasticisers are particularly suited to the manufacture high strength concrete for construction. They are chemical admixtures that have water-reduction capabilities that range from 5.0% to 40.0% in concrete mixes.
For more information see: Concrete superplasticisers.
See also: Admixtures in concrete.
See also Plasticisation.
[edit] Related articles on Designing Buildings Wiki
- Admixtures in concrete.
- Binding agent.
- Blockwork.
- Brick
- Bullseye window.
- Cement.
- Cement mortar.
- Concrete superplasticisers.
- Defects in brickwork.
- Defects in stonework.
- Efflorescence.
- Grout.
- Hot-mixed mortars: the new lime revival.
- Lime mortar.
- Mortar analysis for specifiers.
- Plasticisation.
- Rendering.
- Repointing.
- Spalling.
- Types of mortar.
- Ultra high performance fibre concrete.
Featured articles and news
Infrastructure that connect the physical and digital domains.
Harnessing robotics and AI in challenging environments
The key to nuclear decommissioning and fusion engineering.
BSRIA announces Lisa Ashworth as new CEO
Tasked with furthering BSRIA’s impressive growth ambitions.
Public buildings get half a million energy efficiency boost
£557 million to switch to cleaner heating and save on energy.
CIOB launches pre-election manifesto
Outlining potential future policies for the next government.
Grenfell Tower Inquiry announcement
Phase 2 hearings come to a close and the final report due in September.
Progress from Parts L, F and O: A whitepaper, one year on.
A replicated study to understand the opinion of practitioners.
ECA announces new president 2024
Electrical engineer and business leader Stuart Smith.
A distinct type of countryside that should be celebrated.
Should Part O be extended to existing buildings?
EAC brands heatwave adaptation a missed opportunity.
Definition of Statutory in workplace and facilities management
Established by IWFM, BESA, CIBSE and BSRIA.
Tackling the transition from traditional heating systems
59% lack the necessary information and confidence to switch.
The general election and the construction industry
As PM, Rishi Sunak announces July 4 date for an election.
Eco apprenticeships continue help grow green workforce
A year after being recognised at the King's coronation.
Permitted development rights for agricultural buildings
The changes coming into effect as of May 21, 2024.