The heating and cooling emitters compatible with a heat pump
Contents |
Introduction
Any hydronic heating and cooling emitter such as fan coils, radiators or trench heating, could be used with a heat pump.There are a number of factors, however, which will ultimately impact the final specification. These include thermal requirements, such as whether the building needs heating only or heating and cooling, control requirements and design preferences, such as whether to have the emitter recessed or on view.
Specification of the most appropriate heat pump, combined with suitable emitters, will provide a solution which efficiently meets the building’s heating or heating and cooling demand whilst delivering an optimum indoor climate for occupants.
Emitter types suitable for heating only projects
Any hydronic emitter can be specified with a heat pump i.e. underfloor heating, radiators, fan convection radiators, thermal skirts, fan coils and trench heating - as long as they are designed to work with low temperature systems. Other considerations that might impact selection include level of controllability (whether the system needs be driven centrally or room by room), and aesthetics, which could be driven by the available wall or room space.
Emitter types suitable for heating and cooling designs
Where heating and cooling is required then the emitter choices are reduced to two and four pipe fan coil units, fan coil convectors and four pipe trench heating systems.
These are not restricted by the heat pump but rather by the products available which can deliver both functions. Underfloor heating is generally a heating only option within the UK market, as cooling has the potential to cause a build-up of condensation over time.
Heat pumps can be designed to ensure a temperate indoor environment and when partnered with the right emitters can offer increased efficiencies and cost savings.
For more information on the range of commercial heat pumps and fan coil technology GDHV offer, or to discuss your next project in greater detail contact our team of experts who can further assist you. Otherwise to arrange one of our CIBSE accredited CPDs which offer advice on heat pump and fan coil design and specification, contact our in-house team to be put in contact with your regional expert.
This article was originally published on 20 March 2020.
--Glen Dimplex Heating & Ventilation 15:03, 09 Aug 2021 (BST)
Related articles on Designing Buildings Wiki
Featured articles and news
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Preserving, waterproofing and decorating buildings.
Many resources for visitors aswell as new features for members.
Using technology to empower communities
The Community data platform; capturing the DNA of a place and fostering participation, for better design.
Heat pump and wind turbine sound calculations for PDRs
MCS publish updated sound calculation standards for permitted development installations.
Homes England creates largest housing-led site in the North
Successful, 34 hectare land acquisition with the residential allocation now completed.
Scottish apprenticeship training proposals
General support although better accountability and transparency is sought.
The history of building regulations
A story of belated action in response to crisis.
Moisture, fire safety and emerging trends in living walls
How wet is your wall?
Current policy explained and newly published consultation by the UK and Welsh Governments.
British architecture 1919–39. Book review.
Conservation of listed prefabs in Moseley.
Energy industry calls for urgent reform.
Heritage staff wellbeing at work survey.
A five minute introduction.
50th Golden anniversary ECA Edmundson apprentice award
Showcasing the very best electrotechnical and engineering services for half a century.
Welsh government consults on HRBs and reg changes
Seeking feedback on a new regulatory regime and a broad range of issues.