Brick veneer
A brick veneer, also known as a brick slip, is a thin layer of brick that is used aesthetically as a form of surface finish rather than structurally. Conventional brick walls typically support the structural loads of the building, whereas brick veneers are applied for decorative purposes.
They are generally formed from thin brick slips, which may be as little as 20 mm thick (compared to 102.5 mm for a standard brick). Brick veneers can be used for both indoor and outdoor applications and can be applied to almost any surface. A range of special brick slips are available for conditions such as corners, to continue the illusion that walls are constructed from full bricks.
For interior applications, such as around fireplaces, brick veneers may laid in a similar way to tiles. Mortar (or some other adhesive) is spread on the wall and the bricks are set into place on it, separated during drying by plastic spacers. Once bed mortar has set, the brick joints are pointed using more mortar. Other 'veneers' are available in rolls, as a form of three-dimensional wallpaper.
For exterior applications, the veneer may be laid in a similar way to internal applications, as a form of cladding. However, they may also be installed as a free-standing panels (often prefabricated off site, and sometimes including other components such as insulation), anchored back to the structural frame. This type of veneer is vertically self-supporting, but in multi-storey buildings, shelf angles may be used to provide a horizontal expansion joint, usually at the floor edges. This allows for expansion of the brick and potential shrinkage of the frame.
There are several advantages to using brick veneers:
- They are relatively easy and quick to install.
- They are not as heavy as other forms of masonry, which reduces structural loading.
- Cavities behind external brick veneers can aid insulation.
- They are durable and fire-resistant.
- They can achieve a wide range of decorative functions
- They require little maintenance.
Disadvantages include:
- They are more susceptible to damage as they are thinner than conventional brick walls.
- They do not contribute to structural integrity.
- They can be susceptible to water damage.
- Over time, the veneer will require re-pointing with new mortar.
[edit] Related articles on Designing Buildings
Featured articles and news
Registered building inspectors
Building types and conflicts of interest updates explaineed.
Engineering services still struggle with labour shortages
According to latest quarterly services survey of the sector.
Infrastructure that connect the physical and digital domains.
Harnessing robotics and AI in challenging environments
The key to nuclear decommissioning and fusion engineering.
BSRIA announces Lisa Ashworth as new CEO
Tasked with furthering BSRIA’s impressive growth ambitions.
Public buildings get half a million energy efficiency boost
£557 million to switch to cleaner heating and save on energy.
CIOB launches pre-election manifesto
Outlining potential future policies for the next government.
Grenfell Tower Inquiry announcement
Phase 2 hearings come to a close and the final report due in September.
Progress from Parts L, F and O: A whitepaper, one year on.
A replicated study to understand the opinion of practitioners.
ECA announces new president 2024
Electrical engineer and business leader Stuart Smith.
A distinct type of countryside that should be celebrated.
Should Part O be extended to existing buildings?
EAC brands heatwave adaptation a missed opportunity.
Definition of Statutory in workplace and facilities management
Established by IWFM, BESA, CIBSE and BSRIA.
Tackling the transition from traditional heating systems
59% lack the necessary information and confidence to switch.
The general election and the construction industry
As PM, Rishi Sunak announces July 4 date for an election.
Eco apprenticeships continue help grow green workforce
A year after being recognised at the King's coronation.
Comments
There are many examples of brick slip failures from buildings constructed during the 1960s and 70s which have given slips a 'bad name'. Manufacturers of modern bricks slips are quick to point out that many lessons have been learned and that advances in adhesive and testing technologies have eliminated these fears. Despite this, an internal research study by materials specialist at Arup found that risks still exist around adhesively-bonded brick slip systems, and concludes by recommending the use of mechanically fixed (rather than adhesively fixed) systems only. A summary of the study is given here: https://www.linkedin.com/pulse/brick-slip-cladding-systems-safe-alexis-harrison/