About Injection
We do injection molding for manufacturers and 3d Printing for architects who want to make scale prototypes of their designs and renderings.
Building anything has become accelerated due to technology. And the most disruptive and notable of late is 3d Printing. It's used most commonly to prototype products and industrial design but it's also shaving massive amounts of time off of Architectural Mock Ups and Scale Models.
Injection Molding Companies from China to Los Angeles are finding that rapidly prototyping in 3d is also increasing creative conceptualization as feedback is immediate. So are architects. By building prototypes and scale models of entire structures, architects are finding rapid iteration dramatically increases their responsiveness to versioning. For example, by spraying water on a scale model of a building, a structural engineer and architect can both see hydrodynamics in action.
Not only is prototyping benefiting from 3d Printing, Injection Molding in China or Los Angeles is also being used to produce prefab homes and office building components.
Featured articles and news
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from constructuon and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.
The increasing costs of repair and remediation
Highlighted by regulator of social housing, as acceleration plan continues.
Free topic guide on mould in buildings
The new TG 26/2024 published by BSRIA.
Greater control for LAs over private rental selective licensing
A brief explanation of changes with the NRLA response.
Practice costs for architectural technologists
Salary standards and working out what you’re worth.
The Health and Safety Executive at 50
And over 200 years of Operational Safety and Health.
Thermal imaging surveys a brief intro
Thermal Imaging of Buildings; a pocket guide BG 72/2017.
Internally insulating a historical building
An experimental DIY approach using mineral thermal lime plaster.
Tree species selection for green infrastructure: A guide for specifiers.
The future of the Grenfell Tower site
Principles, promises, recommendations and a decision expected in February 2025.